Alu-Cab Gladiator Bed Cap

[Gringo&Gun]

Anyone mount gear to the outside of the canopy? Looking for options for 1. traction mats 2. 5lb propane tank with mount.

Also, anyone have a link to molle panels for the canopy, not the canopy camper? I'm thinking of adding some to the back of the bins and maybe elsewhere.

I switch it up regularly in terms of setup. Some more custom stuff in works.
-Custom stainless security screen with sun shade holding mod
-All struts upgraded
-Rear door seal air tight mod
-ARB Twin/custom case
-Powertank Propane Mount
-Element mounted
-Expedition essential quick latch both sides
-Beaver shovel roof mounted/Quick Fist Mount
-Cargo Net roof Mounted
-Front Runner eye nuts throughout

Side doors open quicker with quick latch. Can make a vid if interested.

Sponsored

 

[Barnaby’sdad]

@Gringo&Gun, do you have a part number for the rear window security screen? The Alu-Cab website indicated that they don’t have one for the gladiator.

 

[Gringo&Gun]

@Gringo&Gun, do you have a part number for the rear window security screen? The Alu-Cab website indicated that they don’t have one for the gladiator.

I don’t believe one is available from Alu-Cab for our model. Mine was custom made.

 

[yonicehat]

@Gringo&Gun Fantastic idea with the cargo net on the ceiling. What are the dimensions of the cargo net?

 

[Gringo&Gun]

@Gringo&Gun Fantastic idea with the cargo net on the ceiling. What are the dimensions of the cargo net?

Amazon below:

Premium Quality Adjustable Elastic Cargo Net Universal Stretchable Truck Net with Hooks,Storage Bag for Car, SUV, Truck, Pickup Trucks Black 32x24in https://a.co/d/a1Q8Z0z

I mostly use for drying gear/clothes. Added front runner straps for storing heavier items.

 

[Barnaby’sdad]

Can someone share a link to M8 eye bolts that worked for you with the roof channels for securing stuff?

Most of the ones that I’m seeing have mixed reviews. Thank you.

 

[Gringo&Gun]

Can someone share a link to M8 eye bolts that worked for you with the roof channels for securing stuff?

Most of the ones that I’m seeing have mixed reviews. Thank you.

https://www.amazon.com/Front-Runner...95&sprefix=Frontrunner+eye+bolt,aps,83&sr=8-3

 

[Barnaby’sdad]

https://www.amazon.com/Front-Runner-Black-Down-Rings/dp/B00ZUMP8SM/ref=sr_1_3?crid=20THIRD2J0MV2&keywords=front+runner+eye+bolt&qid=1663525895&sprefix=Frontrunner+eye+bolt,aps,83&sr=8-3

Thank you. I added that one to my ‘Jeep’ list, but I wasn’t sure on if that would tighten down in this particular channel.

 

[Barnaby’sdad]

Ok, I’m going to try this again. I need an eye bolt that will fit in this channel inside the roof of the cab (my previous post wasn’t clear on that).

This fits in the literal roof channel (on top of the cab)…not the one above.

 

[Barnaby’sdad]

^ Does anyone make something similar to that in M6? What I just tried won’t workz

 

[ttn333]

For those who ordered or even want to order the kitchen kitted cupboard, what are your thoughts on it? I'm wanting to put in an order for one but there's so little information on it. Does it get dusty?
Also saw this below.

 

[Gringo&Gun]

^ Does anyone make something similar to that in M6? What I just tried won’t workz

Sent PM FYI

 

[Barnaby’sdad]

Sent PM FYI

After I got your PM, the gears started turning. I went and tried something different. If you rotate the bolt just right (as you already know)…it will just barely squeeze in that track and tighten down.

Alu-Cab mentioned that M6 hardware would work. Assuming someone can find some…that’s an option (or just use your brain and properly align the ones that @Gringo&Gun linked to above). Thank you.

 

[MDV Hank]

Ok, I’m going to try this again. I need an eye bolt that will fit in this channel inside the roof of the cab (my previous post wasn’t clear on that).

This fits in the literal roof channel (on top of the cab)…not the one above.

I had to use a flat tip screwdriver and remove the burrs that are left over from when they drill the access hole, its frustrating but it works.

 

[ttn333]

Picked up my canopy yesterday. Hopefully it doesn't rain tomorrow and I can mounted it. Started work on the cupboard. Apparently they don't have a kitchen set for the contour yet, according to a rep from ok4wd. I think she's confusing the new one they'r working on vs the 750mm setup that I've seen others have. So I'm putting together my own.

Sponsored