Anyone out there with a 2" Mopar Lift on 35" or 37" Pizza Cutters?

[IamFrank]

If so, please post pictures and specs. Three years in and I think it's time to give her a lift and some new shoes. Thanks!

Current setup:
Tereflex 1.5" level up front
Rubicon front fenders
Factory Willys wheels with 33" Rubicon tires (Wild Peak M/T's)
Rubicon front bumper w/factory Warn winch
AFE DAS snorkel
Factory '24 grille

Sponsored

 

[Thunderspud]

These were both taken right after I installed the 2" Mopar lift. I believe those were 255/85r17 Baja Boss tires on the stock Rubicon wheels.

 

[NotSo Bright White]

What is your definition of pizza cutters? Do 35 x 11.5 x 17 count?

 

[Jrgunn5150]

I don't think there is a 37" pizza cutter. I looked everywhere to find anything narrower than a 12.5 when I bought mine.

 

[IamFrank]

What is your definition of pizza cutters? Do 35 x 11.5 x 17 count?

Tall but skinny, like a 255/85/17 or maybe 35x10.5x17. Something like that. I prefer minimal tire poke.

 

[IamFrank]

I don't think there is a 37" pizza cutter. I looked everywhere to find anything narrower than a 12.5 when I bought mine.

You are probably right. I've found the 255/85/17's are very scarce as well.

 

[IamFrank]

These were both taken right after I installed the 2" Mopar lift. I believe those were 255/85r17 Baja Boss tires on the stock Rubicon wheels.

That is the look I'm going for! And it looks like the Mickey's are the only option for that size right now, at least at Discount Tire.

 

[Dos704]

I don't think there is a 37" pizza cutter. I looked everywhere to find anything narrower than a 12.5 when I bought mine.

Nitto makes the Recon Grappler in a 37x11.5R17.

 

[JT1]

Nitto makes the Recon Grappler in a 37x11.5R17.

Toyo makes a 38x11.50R17 too.

 

[LouisvEarlleJT]

a 285 tread (or 11.5) on a willys/sport like yours should have 0 poke. The poke comes into play on rubicons/mojaves with the slightly wider axles. Plenty of folks on here running rubicon take offs (285's) on stock sports with 0-poke.

 

[NotSo Bright White]

Got it. I will not bother to send you pictures as the 11.5’s because they are too wide for your liking,

 

[Metalhead]

2 inch mopar lift and Mickey Thompson baja boss tires 255/85R17. Very happy with everything.

 

[IamFrank]

2 inch mopar lift and Mickey Thompson baja boss tires 255/85R17. Very happy with everything.

That looks great. And on factory wheels too. Did you have to use any spacers, or any rubbing issues?

 

[Metalhead]

That looks great. And on factory wheels too. Did you have to use any spacers, or any rubbing issues?

No rubbing issues and no spacers. I like the factory wheels so thats why I went with the skinny tires. I think you can go as wide as 11.5 inches on the factory wheels. My fender flares are aftermarket flares that are high arched like the rubicon flares. I could fit 37 inch tires if I wanted to but I will be sticking with the 35's.

 

[Bandit’s Lair]

Toyo makes a 38x11.50R17 too.

Looking at both sets of the R/Ts of these for me and my Wifey. She going to need new ones before I do but in a 33” version. Might go skinny on hers as well as the 4Runners layout would benefit from a skinnier tire.

I need to double check my gearing in the Tazer but I’m pretty sure I could pull off a 38x11.5 tire on mine. Plenty of uptravel just have to look at rub possibilities.

Sponsored