ATV Fit on Bed of Truck

[Hitman219]

Good day. I am looking at getting 2024 can am outlander 700 xmr. Just wondering if it will fit on the back of my gladiator rubicon’s bed. Here are the dimensions of the atv:

length: 89”
Width:48.8”

i also concerned about the weight on the wheel wells as this bike is 920 pounds. I am not sure if the weight of this vehicle will damage the wheel wells or not.

Thanks for your time

Sponsored

 

[LouisvEarlleJT]

buy a trailer. Most of these trucks have a max payload of 1,000 lbs, give or take.

 

[Hootbro]

Thus assuming a 50/50 weight balance between the front and back axles, you are at best going to be resting just the front wheels on wheel well humps and that would be about 230 pounds resting on each wheel well. It can handle that pretty easily

 

[Hitman219]

The assuming a 50/50 weight balance between the front and back axles, you are at best going to be resting just the front wheels on wheel well humps and that would be about 230 pounds resting on each wheel well. It can handle that pretty easily

thanks for getting back to me. If the bike is 920 pounds. Wouldn’t each end of the bike be 460 lb? If that is the case, can the wheel humps handle that much weight?

 

[Hootbro]

Wouldn’t each end of the bike be 460 lb? If that is the case, can the wheel humps handle that much weight?

The load would be spread out on each wheel hump, hence the 230 lb number

 

[Hitman219]

The load would be spread out on each wheel hump, hence the 230 lb number

oh right. Thanks again Hootbro

 

[Hootbro]

Tailgate also has limits, but I think you would also be fine in that regard.

https://www.jeepgladiatorforum.com/...payload-in-middle-position.16495/#post-309724

 

[Jobofly]

https://www.jeepgladiatorforum.com/...am-850-outlander-fits-in-gladiator-bed.37522/

That is the thread I started with my can am 850 in the bed of my truck

 

[Hitman219]

https://www.jeepgladiatorforum.com/...am-850-outlander-fits-in-gladiator-bed.37522/

That is the thread I started with my can am 850 in the bed of my truck

thanks Jobofly

 

[Hitman219]

You never had an issue with your wheel humps? No damage to them?

 

[Jobofly]

No issues at all.

Sponsored