BUMPERS!

[Yellow1098]

Here’s a really helpful post from the JL forum that has a running list of bumpers (obviously only pay attention to the front bumpers for us Gladiators). May find something you like!

https://www.jlwranglerforums.com/forum/threads/the-aftermarket-bumper-list-jl-jlu-wrangler.2824/

I know it’s probably a silly question but all the JL bumpers fit?

Sponsored

 

[LeftCoast32]

I plan to get the Rusty's Offroad front and rear bumpers.

Rustys Front Xtreme - https://www.rustysoffroad.com/jeep-...umper-jl-with-winch-protection-bar-jl-jt.html

Rustys Rear - https://www.rustysoffroad.com/jeep-...mpers-trail-full-width-rear-jt-gladiator.html

 

[spazzyfry123]

I know it’s probably a silly question but all the JL bumpers fit?

With everything I've read and been told, yes, (front) bumpers fit!

 

[JCJeep1]

With everything I've read and been told, yes, (front) bumpers fit!

but it never hurts to ask if you have a specific bumper in mind.

 

[Rwalk31]

well got the Smittybilt Stryker front bumper installed! What a PIA due to horrible instructions but finally got it. Also installed the Badland Apex 12k winch. Super tight fit.

Now just to decide if I'm going to powder coat it to match body color (billet) and if I'm gonna run it as a stubby or with end caps

Looks really good! Should have decided on powder coat before installing. Lol, I vote leave it black

 

[cgflyer]

https://www.jeepgladiatorforum.com/...ble-swing-outs-by-sos-offroad-concepts.27524/

new thread for a new rear bumper with dual swing outs custom built for my rig but available for order.

 

[TallGuy]

Rugged Ridge Arcus modified for Warn 8274. The 8274 is bigger front to back, so the bumper sits out about 2 more inches. I didn't like the massive tow hooks that came with the Arcus, so retained the stock Rubi red tow hooks and used just a regular D-ring mount.

 

[cgflyer]

Rugged Ridge Arcus modified for Warn 8274. The 8274 is bigger front to back, so the bumper sits out about 2 more inches. I didn't like the massive tow hooks that came with the Arcus, so retained the stock Rubi red tow hooks and used just a regular D-ring mount.

That's a cool looking winch

 

[Rulf]

Swapped out the stock plastic Rubicon for the Rugged Ridge HD Stubby.

https://www.4wheelparts.ca/p/rugged-ridge-hd-stubby-front-bumper-11540-32/_/R-BKMS-11540.32

 

[JRW]

I didn't like the massive tow hooks that came with the Arcus, so retained the stock Rubi red tow hooks and used just a regular D-ring mount.

I like that, where'd you get the d rings?

 

[Russler]

Visibility, in the process of installing my ADD Stealth front and rear bumpers. Probably not an issue if you never leave the road but the front bumper exposes the sway bar disconnect and ADD does not offer a solution to protect at this point in time. I am going to cut down my stock/existing plate for now and hoping they come out with a better solution in the future.

 

[spazzyfry123]

Visibility, in the process of installing my ADD Stealth front and rear bumpers. Probably not an issue if you never leave the road but the front bumper exposes the sway bar disconnect and ADD does not offer a solution to protect at this point in time. I am going to cut down my stock/existing plate for now and hoping they come out with a better solution in the future.

Have you considered something like @ACE Engineering ’s motor flip kit to get it out of the way?

https://aceengineeringandfab.com/products/electronic-sway-bar-flip-kit

 

[Russler]

Have you considered something like @ACE Engineering ’s motor flip kit to get it out of the way?

https://aceengineeringandfab.com/products/electronic-sway-bar-flip-kit

I will check it out. Thanks

 

[TallGuy]

I like that, where'd you get the d rings?

Picked up the d ring mount at local 4 wheel parts but in hindsight you can get a pair of rugged ridge on amazon for $60 or so.

 

[Keller]

I will check it out. Thanks

I can’t believe they would charge $35 for a few bucks worth of hardware. I did this for less than $5 and a trip to my local Ace Hardware store.

Sponsored