Can anyone post their setup with wheel spacers?

[OM Jeep]

I have a Rubicon on 37s with stock Rubicon wheels. Currently looks like this.

From what I understand I need 1.75” spacers minimum to clear the wheel studs with the stock wheels.

Would love to see what that would look like!

Sponsored

 

[Sarge502]

I no longer have them since I purchased aftermarket wheels recently, with the exact same offset that I had with the spacers, considering I don't like a huge amount of poke.

But I had the TeraFlex spacers, which are 1.75 inches. Which is basically around a zero offset.

I have since bought some black rhinos with a zero offset so I ditched the spacers, but was pretty happy with my previous set up running them with the stock wheels for almost 2 years. Perfect amount of poke for me. Which is why I stayed with it when I bought my new wheels.

 

[Jeepmonster]

I used 1.5" spacers with my stock Rubicon wheels. The factory studs stick out a bit, but they do not make contact with the backside of the wheel. No grinding needed. Better description and pictures here:

https://www.jeepgladiatorforum.com/...arning-no-politics.23705/page-547#post-621911

 

[Rusty PW]

Boy........you are in luck. I just did this last weekend. I installed a set of 1.75" thick Synergy spacers. The factory studs do not stick out. So you don't have to cut the stud. I installed a set of 37's on the Rubi rims.

 

[Bear Hunter]

I have 33s with 1.25 spacers. I like them...

 

[OM Jeep]

Thanks guys!

 

[Wheelin98TJ]

I have 1.5" wheel spacers.

 

[WILDHOBO]

Thanks guys!

37x12.5 Mickey Thomson’s with 1.75” spidertrax spacers. 2 years so far. No issues. Even on very difficult trails.

 

[Mflowers11]

I have 1.5" wheel spacers.

@Wheelin98TJ that looks great. I’ve got the HA with 1.75” spacers as well but still have the stock tires. Seeing that makes me look forward to another 20k when I need new tires….

 

[AlexC00]

I've got these set for bonoss spacers about 2k miles and love them. No problems what so ever.

Sponsored