Dash cubby switch box

[Mr.Lackey]

Does anyone know of any switch box that is made for the 2021 Gladiator dash cubby? I'm using classic lighted rocker switches. Used cardboard to mock up what I've been wanting but have yet to find a premade box or 3d print file.

Also looking for any wire routing advice from battery to inside cab. Have manual transmission so cannot use "clutch hole". Really prefer to not drill.

Sponsored

 

[Puch]

Does anyone know of any switch box that is made for the 2021 Gladiator dash cubby? I'm using classic lighted rocker switches. Used cardboard to mock up what I've been wanting but have yet to find a premade box or 3d print file.

Also looking for any wire routing advice from battery to inside cab. Have manual transmission so cannot use "clutch hole". Really prefer to not drill.

Maybe something like this might work?
Can’t help with wire access. Sorry.

 

[BourbonRunner]

Many moons ago I did an overhead switch panel in my '04 Taco with a Radio Shack ABS project box and a Dremel tool. Used factory Toyota aux switches, ran bundled cable down through the pillar to another box that contained relays and power source. Might be able to find something similar here and make it work in the space: https://www.polycase.com/abs-enclosures

Far as the panel front, Concord Aerospace has some pretty badass switch panels. https://www.concordaerospace.com/products/customizable-apollo-master-alarm-panel

 

[HorsesRear]

I don't see anything wrong with the one you made.

Sponsored