BombshellJT
Member
- First Name
- Greg
- Joined
- Aug 4, 2020
- Threads
- 3
- Messages
- 17
- Reaction score
- 8
- Location
- Albuquerque, NM
- Vehicle(s)
- 2020 JT Sport-S, 2012 JKU, 2022 JLR
- Occupation
- Software Developer
- Thread starter
- #1
I have a 2020 JT and have been chasing a death wobble problem ever since going from a 2" spacer lift to a 3" Rancho lift. Originally got the wrong part for the new steer stabilizer, so ran without one for a few weeks. Noticed a bad death wobble stemming from bump-steer. Installed a Fox 2.0 through shaft stabilizer, track bar relocation bracket, and flipped drag link at the same time. Wobble still present. Replaced crappy Rancho track bar with SteerSmarts. Bump-steer definitely better but problem still exists. Noticed when removing Rancho track bar the jam nut keeps coming loose, so the axle end was just flopping around. Steering geometry looks great now. Front axle is very centered. Not so much with the rear because factory track bar (replacing with adjustable rear track bar next to center up the rear axle).
But there is still significant bump-steer. At this point I'm not sure what could be causing it.
2020 Gladiator
3" Rancho lift
Rancho front upper/lower control arms
Stock rear control arms and track bar
Rancho shocks
Fox 2.0 Performance TS steer stabilizer
Synergy drag link (flipped position)
SteerSmarts Yeti-XD Pro-Series track bar
SteerSmarts track bar relocation bracket and track bar/sector shaft brace
Stock tie rod
RockJock AntiRock sway bar setup (aluminum arms, .850" bar)
JCR Off-road bed rack and Roofnest Condor tent
But there is still significant bump-steer. At this point I'm not sure what could be causing it.
2020 Gladiator
3" Rancho lift
Rancho front upper/lower control arms
Stock rear control arms and track bar
Rancho shocks
Fox 2.0 Performance TS steer stabilizer
Synergy drag link (flipped position)
SteerSmarts Yeti-XD Pro-Series track bar
SteerSmarts track bar relocation bracket and track bar/sector shaft brace
Stock tie rod
RockJock AntiRock sway bar setup (aluminum arms, .850" bar)
JCR Off-road bed rack and Roofnest Condor tent
Sponsored
Last edited: