Drop in Bed Liner over Bed lined truck bed!

[Alan SOBX]

Hard to go wrong for something you can easily pick up and is only $50. Roll the dice. If it ends up sucking, post it back to this forum and we will come up with some creative things to do with it.

Sponsored

 

[FloridaAussie]

Hey where's it at? If you don't want it, I'll come get it.

 

[Jeeperjamie]

Got it installed today finally. Perfect fit. Only problem I had was the rear screws against the bed walls were missing or not put back by the dealership when they bedlined it. Went to Lowe's and picked 2 up for $3. Gotta spray it off and clean it up a little bit for $50 it's worth it. Fits. Perfect.

 

[BlackOak]

I have a weather tech loner fits like a glove but probably not for a hard working truck. I did have my running boards coated from Line-X great, tough, a finish that should wear very well

 

[Jeeperjamie]

I have a weather tech loner fits like a glove but probably not for a hard working truck. I did have my running boards coated from Line-X great, tough, a finish that should wear very well

My bed was line-xed by the dealer or they had a company do it for them. I am not impressed honestly. I thought it would of held up better.

 

[BlackOak]

My bed was line-xed by the dealer or they had a company do it for them. I am not impressed honestly. I thought it would of held up better.

That's unfortunate this was my first experience with it they sand blasted the running boards and then coated them I guess when your working hard both you and the truck bed get beat up

 

[Jobofly]

Are there holes to mount the trail rail?

 

[Jeeperjamie]

That's unfortunate this was my first experience with it they sand blasted the running boards and then coated them I guess when your working hard both you and the truck bed get beat up

I had Scorpion liner done on my fenders and rock rails on my JKU and had the very back done as well. I hauled all kinds of stuff back there and it held up better than the Line-X in the JT has done. The scorpion liner had more texture and even felt tougher.

 

[Minty JL]

I put in a rubber bed pad over my bedliner to keep things from sliding around, it fit in just fine.

Which one did you go with?

I'm looking at the one Weathertech sells

 

[Jeeperjamie]

Which one did you go with?

I'm looking at the one Weathertech sells

My buddy had this one and I'm thinking about buying it for mine. Seems to do the job and fits great in the back of his

https://www.roughcountry.com/truck-bed-mats/jeep/gladiator/2023

 

[Mr._Bill]

I like this one from WeatherTech.

WeatherTech ImpactLiner Truck Bed Liner for Jeep Gladiator (36017IM) Black https://a.co/d/5t3MGXZ

 

[Sweetums]

Which one did you go with?

I'm looking at the one Weathertech sells

It would still protect the bed from additional damage, probably better than a plastic liner that can still abrade the remaining bedliner and paint - and it's available on Amazon.

 

[JoeJeep74]

I have the same Rugged brand drop in liner plus I put a rubber bed mat over it to keep stuff from sliding around. The drop in board option is nice from time to time. I have a soft trifold Gator brand tonneau cover that keeps stuff dry and out of sight. I had a drop in liner in a Dodge Dakota with a fiberglass cap for years and no issues with underlying bed( not lined). I expect no underlying issues with this truck either. I think for $50.00 it was a steal and should work out well for you.

Sponsored