Fox ATS Stablizer Mounting

[dayusmc]

I want to get a Fox ATS stablizer for my 2020 Mojave. Do they mount to the factory brackets or do I have to buy different mounts?

Sponsored

 

[CrazyCooter]

It comes with everything you need assuming you are running an oem tie rod. It does hang low like the original though.

 

[dayusmc]

I see a bunch of different mounts different companies sell for it. Is that to change how low it hangs?

 

[CrazyCooter]

I see a bunch of different mounts different companies sell for it. Is that to change how low it hangs?

Could be. I used a JK relocation stud and machined my own clamp to fit the OEM tie rod to get it up higher. I know a JK kit out of the box works for an aftermarket 1.5" tie rod too.

 

[Wylie E]

Fox makes 2 different mounting styles. One is designed for direct replacement with minor modifications and the other can be used to relocated the stabilizer higher with additional mounting parts.
There are a lot threads on here discussing this topic. Just search Fox ATS and start digging.

 

[dayusmc]

Thank you. I did some searching on here. I was confused because I didn't realize Fox made 2 different ATS stabilizers for the Gladiator.

 

[CrazyCooter]

Yes, 2 different TS units. The Race Series ATS adds an adjustment screw on it so you can tailor your damping needs, which I can highly recommend if it fits your budget.

I only see one mounting option from Fox on their site and that's the OE style low mount, but I have seen different mounting options from outfits like Poly Performance.

 

[dayusmc]

I see 1 ATS and 1 TS, but I don't see different mounting options

 

[Rockabillyroy]

I don't think there is two jl/jt mount versions.
People buy the jk version to get the clamp style mount.
I think you can swap it out, but people have stripped the bolt because of how tight it is. And manybe reversed threaded as well.

 

[High Alextude]

factory location

 

[dayusmc]

I guess the confusion comes from synergy's website. I think they list the Fox JK stabilizer 983-02-142 as JK/JL/Jk and the same for the 983-02-148 as the same.
I eventually am going to change my tie rod but don't know what one I am going with yet..

 

[Dickster]

Yes it comes with oem fitment, but suggested relocating it. Off road over any rocks it will be hit and take a bounding.

Synergy track bar bolt and clamp bracket is the simplest and cheapest.

 

[CrazyCooter]

I guess the confusion comes from synergy's website. I think they list the Fox JK stabilizer 983-02-142 as JK/JL/Jk and the same for the 983-02-148 as the same.
I eventually am going to change my tie rod but don't know what one I am going with yet..

I that comes from the angle of which diameter of tie rod do you have?

 

[dayusmc]

I have the stock Mojave one right now.

 

[Dickster]

I have the stock Mojave one right now.

The clamp is not universal. You will want one for the ATS and bar diameter.

Sponsored