ecidiego
Well-Known Member
Pretty loaded question. I'd recommend using the JT threads as a guideline and go from there. Seems more JT guys have done this than JL.What parts # for JEEP WRANGLER
Offhand the CVPM will be different. It's also in a different place....no clue where...so you'll need to figure that out and adjust wire lengths accordingly. The harness you need will be different....either custom or you can pay Jimmy to make a JL specific one.
The rear cam will be different...you'll need to get a VIN of a JL with factory front camera...ask a Jeep parts counter for the rear camera part for that VIN...then get your color....are they even painted on JLs? Cable will be different....routing...everything.
Lot of work. Don't mess with this unless you're down for a challenge.
Cliffs:
1. Front camera and grill sections may or may not be different.
2. All coax cables might be different lengths and need different male/female ends.
3. Rear camera will be different.
4. CVPM will be different...both the part and where it is located.
5. 8.4 Uconnect still required.
I'd honestly consult JL guys.
Sponsored