WILDHOBO
Well-Known Member
Staring at a parts box, drinking a beer, and making seven hardware store runs?
I just assumed everyone did the same crap I do on weekends.
Sponsored
Sponsored
I need help with my Trail Rail installation
- Thread starter davidmech21
- Start date
- Watchers 8
I just assumed everyone did the same crap I do on weekends.
cybercat
Well-Known Member
I use this type of Rivet-Nut instead the knurled type. And some 3m DP420 scotch-weld to make them permanent. " Like in forever"
Multi-Grip Rivet-Nut, M6 Pre-Bulbed Shank Carbon Steel Color-Zinc-Plated Flat Head.
Multi-Grip Rivet-Nut, M6 Pre-Bulbed Shank Carbon Steel Color-Zinc-Plated Flat Head.
MaximusTX
Well-Known Member
Mine didn't have the trail rail or a top on it and was missing the rivnuts. It had the holes but no rivnuts installed. I used this tool to get them installed. It comes with everything I needed except the bolts which you can get at any hardware store or from Amazon as well.
Rivet Nut Tool, Professional Rivet Nut Tool Kit with 11 Metric & Inch Mandrels
Rivet Nut Tool, Professional Rivet Nut Tool Kit with 11 Metric & Inch Mandrels
djthumper
Well-Known Member
- First Name
- Larry
- Joined
- Oct 5, 2021
- Threads
- 1
- Messages
- 528
- Reaction score
- 419
- Location
- North Las Vegas, NV
- Vehicle(s)
- 21 JT Sport S Eco Diesel, 18 JLU Sport S
- Occupation
- I.T.
Grab a cleaning tap to clean the threads from the paint. I did that after the first bolt got messed up and everything went together smoothly.
OP
OP
davidmech21
Member
- First Name
- David
- Joined
- Jul 27, 2023
- Threads
- 1
- Messages
- 9
- Reaction score
- 3
- Location
- Cleveland, TN
- Vehicle(s)
- 2018 Jeep Wrangler JL and 2021 Jeep Gladiator JT
- Thread starter
- #20
I think you summed it up pretty well...
GROGG
Member
- First Name
- Steven
- Joined
- Jan 9, 2024
- Threads
- 0
- Messages
- 19
- Reaction score
- 23
- Location
- St. Paul, Alberta, Canada
- Vehicle(s)
- 2021 Wrangler Willys and 2022 Gladiator Rubicon
- Occupation
- RETIRED
I was looking at your photo and didnt notice a 3rd rail. Should have 2 sides and a front rail as well as 6 mounts/tie downs plus the bolts.
I ordered the OEM trail rail system to install in by truck bed, but the guy that shipped it to me put it in a box with two open ends, enclosed only with packing tape, so the hardware packet slipped out of the box during shipping, and I don't have any of the screws or the rivnuts to install it. He offered me a partial refund for the lost hardware, but the issue is I don't know what to order to replace it all. Can someone with the trail rail system tell me what size the screws are so I can go to the hardware store and buy some replacement screws? I found the rivnuts on Quadrartec's website, and they're around $17 each. I'm looking on the various MOPAR part stores online now for a cheaper option. Thanks in advance.
Sponsored
