MetalCloak control arms & track bar

[Rvansickle]

Does anyone know the wrench size needed for the adjuster nut on the control arms and track bar on the MetalCloak 3.5” game changer lift?

Sponsored

 

[fourfa]

I have in my notes: 1.5” for lowers, 1 11/16” for lowers, and 1.275” for track bars. I just got a giant adjustable wrench ?

 

[Rvansickle]

I have in my notes: 1.5” for lowers, 1 11/16” for lowers, and 1.275” for track bars. I just got a giant adjustable wrench ?

good idea, I don’t have one big enough so looks like I need to buy more tools haha.

 

[Escape.idiocracy]

good idea, I don’t have one big enough so looks like I need to buy more tools haha.

Tractor supply usually has a reasonable price for fixed wrenches at this size.

 

[RodRecket]

Get a set of crowfoot wrenches. You can tighten with a breaker and or a torque wrench. I have a 250lb torque wrench I used. Couldn't get it much tighter than that even with a breaker bar. Better off than trying an adjustable wrench.

 

[fourfa]

Here ya go - metalcloak makes them to fit:
https://metalcloak.com/catalogsearch/result/?q=Crow
I actually found it hard to find any large enough, except these

But I disagree on the second part - the ~14” adjustable I use is quality, very tight and parallel, and easy to crank hard. Small adjustables are often loose cheap crap but the big ones seem to be quality

 

[Hootbro]

Better off buying the Crowfoot in the size you need than a fix beam style wrench. With a crowfoot, you can index it as needed with either a breaker bar or ratchet. There is hardly any room on the front track bar to wield a large fixed wrench in there

 

[bleda2002]

Harbor freight big ass adjustable wrench, I use the 18 and 24 inch ones.

 

[Rvansickle]

Harbor freight big ass adjustable wrench, I use the 18 and 24 inch ones.

That’s what I went and bought lol

Sponsored