Mopar lift lower control arms

[jc1986]

I installed the mopar lift lower control arms when I installed my 1.5” spacers. Has anyone else installed these running only the teraflex 1.5” spacer? I would be interested if anyone else has and what your opinion is. At 30 bucks a piece from BAM it doesn’t seem like it would be a bad idea.

Sponsored

 

[Gren71]

I put them in after doing to 2in iron rock off road spacer lift. Certainly agree that it was a phenomenal little addition to an inexpensive lift.

 

[Jeeperjamie]

Are they longer than the stock ones, if so is be interested in adding them to mine

 

[jc1986]

Are they longer than the stock ones, if so is be interested in adding them to mine

Yeah, they are a quarter inch longer.

 

[ShadowsPapa]

Are they longer than the stock ones, if so is be interested in adding them to mine

I'm thinking about it.
I don't really have a "lift" but I put Rubicon front springs under it which raised it about 7/8" then the bumper, winch and skid plate which dropped it .5" and then I plan on adding Daystar .75" spacers. Whew, a lot of math! In other words, it will be up about 1" higher than factory or somewhere in there......

 

[Jeeperjamie]

I'm thinking about it.
I don't really have a "lift" but I put Rubicon front springs under it which raised it about 7/8" then the bumper, winch and skid plate which dropped it .5" and then I plan on adding Daystar .75" spacers. Whew, a lot of math! In other words, it will be up about 1" higher than factory or somewhere in there......

If they are only like $60 then I may be all over that, be better than adding Geo Brackets to the lower control arms. Mines driving and handling great but if they will get me closer to the stock angle for that price I'm willing to throw them on

 

[brianinca]

I run them on my stock height JTR, it is a cheap fix for dialing in a bunch of caster to get around the steering box wander. Made my wife and myself a lot less fatigued on any kind of distance driving.

I doubt I'll bother with going back to the stock arms after the TSB, but I'll be right ticked off if the dealership tries the "I don't see a problem" response.

 

[TJDave]

Link for the Mopar 2" lift control arms by themselves?

 

[Mac]

OP, what are the part numbers?

 

[jc1986]

OP, what are the part numbers?

https://www.bamwholesaleparts.com/oem-parts/mopar-arm-lower-control-68322798aa

https://www.allmoparparts.com/sku/68322798aa.html

 

[Mac]

Thanks, is there a left and right?

 

[ShadowsPapa]

BAM says no longer available. Either that means the number has been superseded or - they are no longer available!

If you live in California, they may be a cancer risk and cause reproductive harm so I suggest you don't eat them or lick them or sleep with them.

 

[jc1986]

Thanks, is there a left and right?

They are the same left and right. You just need to purchase two.

 

[Bonanza]

BAM says no longer available. Either that means the number has been superseded or - they are no longer available!

If you live in California, they may be a cancer risk and cause reproductive harm so I suggest you don't eat them or lick them or sleep with them.

Last I checked this is still America! I'll eat my control arms if I want to!

 

[Gren71]

Last I checked this is still America! I'll eat my control arms if I want to!

ha!

Sponsored