Mopar Slush mats...a bit off

[xdamageincx]

I do have a set of carpet mats that came with mine and I will sell them. Used for a week before my slush mats arrived.

It’s your driver side Mopar rear slush mat that is wrong (JL version)? that sucks. I have an extra passenger side rear section. Had to replace my driver side so ordered another set, but that doesn’t help here. I have a spare set of Mopar front slush mats and a rear passenger section if someone ends up needing them.

Let me know what you are unloading the carpet mats for...
The dealer is replacing the slush mat set.

Sponsored

 

[raypla]

I ordered a complete set of mats off Amazon, red lettering Mopar, for a JL. Fronts fit mint, rear not so much, looks similar to your pic.

 

[xdamageincx]

I ordered a complete set of mats off Amazon, red lettering Mopar, for a JL. Fronts fit mint, rear not so much, looks similar to your pic.

Mine came from the factory...that's really strange.

 

[MyRight]

I seem to have an issue with the front driver's side mat remaining fastened on the left side.
The raised portion to the right of the fastener is causing it to continually pop off.
It appears that the raised "vent" is too tall, not allowing it to remain fastened.

Anyone else with Mopar slush mats encounter the same issue?

 

[Shaqeroni]

Hopefully nothing else in the heep is mismatched this bad lol...
Driver's rear slush mat...
Has relieved areas (cutouts) to accept things that aren't there, snap in holes do not align (waaay off) and has only 2 holes in it for 3 snap pins.
Dealer ordered a new one.
It doesn't have the red Jeep on any of the mats either but does have a Willy's style WWII Jeep on the affected mat.
JT Rubicon...
Are they all like this?
I can't image the factory mixing 1 of 4 mats with a different model.

Mine were exactly the same way. Sucked. I also hated how slippery the front ones were. I just got a set of 3W slush mats for my 2021. I LOVE them. Check out their video because they are literally award winning. The company also seems to be environmentally conscious and the mats are made out of recyclable materials. Way better wet grip for your feet.
https://www.amazon.com/3W-Floor-Mat...ner-2nd-Row-Full-Set-Car-liners/dp/B08CSZ9WLT

 

[Shaqeroni]

I seem to have an issue with the front driver's side mat remaining fastened on the left side.
The raised portion to the right of the fastener is causing it to continually pop off.
It appears that the raised "vent" is too tall, not allowing it to remain fastened.

Anyone else with Mopar slush mats encounter the same issue?

You have to cut the little carpet pieces out...save them in case you decide to get different mats like I did...take out the rubber plug then put the plug into the mats themselves. Voila! The mats are installed properly now. Why this isn't done at the factory or the dealership I will never know.

 

[Gvsukids]

You have to cut the little carpet pieces out...save them in case you decide to get different mats like I did...take out the rubber plug then put the plug into the mats themselves. Voila! The mats are installed properly now. Why this isn't done at the factory or the dealership I will never know.

Mine was.

 

[xdamageincx]

I seem to have an issue with the front driver's side mat remaining fastened on the left side.
The raised portion to the right of the fastener is causing it to continually pop off.
It appears that the raised "vent" is too tall, not allowing it to remain fastened.

Anyone else with Mopar slush mats encounter the same issue?

Mine as well- I think you need to cut out the drain hole in the carpet as it is like a gutter and keeps the mat pushed up because there is no relieved spot in the carpet (drain hole).

 

[xdamageincx]

Mine were exactly the same way. Sucked. I also hated how slippery the front ones were. I just got a set of 3W slush mats for my 2021. I LOVE them. Check out their video because they are literally award winning. The company also seems to be environmentally conscious and the mats are made out of recyclable materials. Way better wet grip for your feet.
https://www.amazon.com/3W-Floor-Mat...ner-2nd-Row-Full-Set-Car-liners/dp/B08CSZ9WLT

Unfortunately these don't have the drain hole according to your link in the QA section.

 

[Shaqeroni]

Unfortunately these don't have the drain hole according to your link in the QA section.

They do not. You are correct.

 

[MyRight]

You have to cut the little carpet pieces out...save them in case you decide to get different mats like I did...take out the rubber plug then put the plug into the mats themselves. Voila! The mats are installed properly now. Why this isn't done at the factory or the dealership I will never know.

Ok, I finally figured out exactly what you were referring to...

Luckily, the factory had already precut those two spots, so I just had to pop them out and then remove the rubber plug from the floorboard.

The mat was able to snap down and plug the hole, so everything fit much better.

Then I plugged the opening with the rubber plug pulled from the floorboard.

 

[Shaqeroni]

Ok, I finally figured out exactly what you were referring to...

Luckily, the factory had already precut those two spots, so I just had to pop them out and then remove the rubber plug from the floorboard.

The mat was able to snap down and plug the hole, so everything fit much better.

Then I plugged the opening with the rubber plug pulled from the floorboard.

Perfect!! I'm psyched you figured out what I was talking about. I apologize for any confusion.

 

[yushjr]

You have to cut the little carpet pieces out...save them in case you decide to get different mats like I did...take out the rubber plug then put the plug into the mats themselves. Voila! The mats are installed properly now. Why this isn't done at the factory or the dealership I will never know.

Yeah, I cut mine out too.

 

[Deleted member 28696]

I ordered some new slush mats that have the red Jeep lettering. My Rubicon came with slush mats already but in black only. On Both the back pieces match side to side so they button together.

 

[KJ Jeeper]

My drivers side front slush mat doesn’t lay flat down under the brake. I think the mopar mats are poor quality - very cheap thin plastic.

Sponsored