Mount Solutions for new ARB brushless CKBLTA12

[CapChimiChangas]

Hi ,

Where can I find Mount solutions for the
CKBLTA12

latest ARB twin compressor?

I want to get one and mount it on my hood, but I can't find a mount solution for it yet.

Links and suggestions are welcome

Sponsored

 

[smlobx]

On your hood?
Do you mean in your engine bay? Are the compressors the same size/dimensions as the previous versions? If so, then there are several brackets in the market.

 

[Figmo]

They fit perfect under here. And there's even room for an air tank.

 

[fourfa]

@813 Fabrication & Design has one in the works



(this vid looks like for the single, but their website references new designs coming for twins too)

 

[813 Fabrication & Design]

Hi ,

Where can I find Mount solutions for the
CKBLTA12

latest ARB twin compressor?

I want to get one and mount it on my hood, but I can't find a mount solution for it yet.

Links and suggestions are welcome

All of the twin mounts I offer will work. I have several of the updated mounts in production and should start getting those this week. I have at least 5 mounts for the twin that work on the Gladiator. Let me know if I can help!

 

[813 Fabrication & Design]

On your hood?
Do you mean in your engine bay? Are the compressors the same size/dimensions as the previous versions? If so, then there are several brackets in the market.

The new twin is actually a little smaller overall. It is a bit wider, but approx 1/2" less tall. The new compressor requires a few new mounting holes in the mounts so most companies are scrambling to get their mounts updated.

 

[CapChimiChangas]

On your hood?
Do you mean in your engine bay? Are the compressors the same size/dimensions as the previous versions? If so, then there are several brackets in the market.

Yes I meant in my Engine bay, I'm not sure if they are "the same"

• Width 13.31 inch
• Height 6.69 inch
• Length 14.49 inch
• Weight 15.8 lb

• Width 7.5 inch
• Height 4 inch
• Length 10.8 inch
• Weight 17.4 lb

The CKBLTA12 is a bit bigger

here is the specs of CKBLTA12

Here are the CKMTA12

 

[CapChimiChangas]

@813 Fabrication & Design has one in the works



(this vid looks like for the single, but their website references new designs coming for twins too)

Thanks I'll keep a look for them

 

[CapChimiChangas]

The new twin is actually a little smaller overall. It is a bit wider, but approx 1/2" less tall. The new compressor requires a few new mounting holes in the mounts so most companies are scrambling to get their mounts updated.

Thanks Jeremy I'll take a look into your site and reach out to you directly, I wan to figure this out before I began breaking things apart since I'll use it for the lockers.

 

[Toothgnasher]

All of the twin mounts I offer will work. I have several of the updated mounts in production and should start getting those this week. I have at least 5 mounts for the twin that work on the Gladiator. Let me know if I can help!

Semi-hijacking this thread - do the bed mounts fit the new brushless compressors (twin specifically)?

 

[813 Fabrication & Design]

Semi-hijacking this thread - do the bed mounts fit the new brushless compressors (twin specifically)?

Yes! I reworked the mounting holes so that all 4 of the ARB compressors will fit now. I have both medium and large in stock. Let me know if you have any questions or need help.

 

[Northridge4x4]

@Tech Tim just finished up the install of the new Grimm Off Road under the hood mount for the new brushless compressor. There will be a full install video coming in a few weeks.

The new compressor mount will fit both the brushless or the classic twin: Grimm Off Road pn# GOR10833

We'll have the first run from Grimm on the shelf in a couple weeks.

 

[Toothgnasher]

Yes! I reworked the mounting holes so that all 4 of the ARB compressors will fit now. I have both medium and large in stock. Let me know if you have any questions or need help.

Thanks! Waiting on a couple of things before I pull the lever on getting the medium mount, I think. Onboard air will be the first ‘major’ update to the rig. I know I’m going to miss not having onboard air after years of it on the JL. As a ‘use frequently’ update it’s easy and relatively inexpensive.

 

[813 Fabrication & Design]

Thanks! Waiting on a couple of things before I pull the lever in getting the medium mount, I think. Onboard air will be the first ‘major’ update to the rig. I know I’m going to miss not having onboard air after years of it on the JL. As a ‘use frequently’ uplate it’s easy and relatively inexpensive.

Sounds good! I miss mine right now! I took out the classic single under the hood to test fit the new brushless but have not wired it in yet. Needs to be done soon!

 

[CapChimiChangas]

@Tech Tim just finished up the install of the new Grimm Off Road under the hood mount for the new brushless compressor. There will be a full install video coming in a few weeks.

The new compressor mount will fit both the brushless or the classic twin: Grimm Off Road pn# GOR10833

We'll have the first run from Grimm on the shelf in a couple weeks.

Yeaahhh thanks, another colleague sent me the same
Link

Sponsored