kyleking777
Well-Known Member
- First Name
- Kyle
- Joined
- Apr 23, 2019
- Threads
- 6
- Messages
- 46
- Reaction score
- 173
- Location
- Tulsa, Oklahoma
- Vehicle(s)
- 2014 JKRU
- Thread starter
- #1
So I am Currently having the gears in my Rubicon axles swapped from 4.10 to to 4.88 due to my tire size change.
Using all Dana Spicer brand 4.88 gears and install kit.
everything has gone great and according to plan. However there is one small issue. The rear axle locker light will not stop flashing on the dash. I have used my flashcal to reprogram for the new tires and gears. The lockers engage and disengage correctly. However the light on the dash just does not stop or start flashing. It’s a continuous flash as if the axle locker is waiting to engage or disengage.
I have read there are issues in the JL rubicon axles with the sensors or actuators causing this same issue on stock untouched axles. Anybody have this issue or come up with a solution on the JL? I’ve heard this problem before but have not gotten a solution yet.
Using all Dana Spicer brand 4.88 gears and install kit.
everything has gone great and according to plan. However there is one small issue. The rear axle locker light will not stop flashing on the dash. I have used my flashcal to reprogram for the new tires and gears. The lockers engage and disengage correctly. However the light on the dash just does not stop or start flashing. It’s a continuous flash as if the axle locker is waiting to engage or disengage.
I have read there are issues in the JL rubicon axles with the sensors or actuators causing this same issue on stock untouched axles. Anybody have this issue or come up with a solution on the JL? I’ve heard this problem before but have not gotten a solution yet.
Sponsored