Show us your Overlanding Appliances / Gear!

[Mules]

I'll show you what I put in my overlanding rig, if you show us yours.

Please post your appliances and recommendations.

Heater:
5,000 to 8,000 watt Diesel Heater exhausted through pickup bedside.

Sponsored

 

[Mules]

Plumbing:
Stainless Steel Sink, 12v pressure switch pump, and 5 gallon Sceptor can for water.

 

[Mules]

Fridge:
Iceco JP42 Fridge/Freezer/Cooler.

Since it's Rotomolded like a Yeti, it will hold ice for days, without power.

Sometimes I put it in the back and sometimes I put it in the front.

 

[RubiNewbCB]

" Sometimes I put it in the back and sometimes I put it in the front. "

 

[MSFTMatt]

OH MY!!!

 

[Benbean66]

I'll show you what I put in my overloading rig, if you show us yours.

Please post your appliances and recommendations.

Heater:
5,000 to 8,000 watt Diesel Heater exhausted through pickup bedside.

Lager?!?! I didn't know you could get that out your way. I live about 10 minutes from their brewery in Pottsville, PA.

 

[Mules]

Lager?!?! I didn't know you could get that out your way. I live about 10 minutes from their brewery in Pottsville, PA.

Oldest and arguably best Brewery in America baby!

 

[Mules]

Big storage:

Kobalt rolling tool boxes fit almost perfectly in the back of the Gladiator! And they kept my cloths and food goods dry on rainy/snowy ski trips to the Rockies.

 

[Mad Mac]

Yuengling opened a brewery in Fort Worth, Republic of Texas.
I can now get Yuengling here in my backwater county
in far northwest, deep east Texas.

 

[BourbonRunner]

Yuengling opened a brewery in Fort Worth, Republic of Texas.
I can now get Yuengling here in my backwater county
in far northwest, deep east Texas.

If they still have the one in Tampa, that makes three breweries now. Hard to believe when I was young man you couldn't get it much further outside of PA than over the line here in MD or just into WV. Getting it then was like getting Coors east of the Mississippi from Smokey and the Bandit- it was a big deal.

 

[Flyin6]

I'll show you what I put in my overloading rig, if you show us yours.

Please post your appliances and recommendations.

Heater:
5,000 to 8,000 watt Diesel Heater exhausted through pickup bedside.

Off subject, but I have long admired this custom build. I vote it easily as the best on this or any other side. Quality of build, ingenuity, fit finish, cool factor are just off the chart!
Well done!

 

[Mules]

Yuengling opened a brewery in Fort Worth, Republic of Texas.
I can now get Yuengling here in my backwater county
in far northwest, deep east Texas.

I went to High School in Texas. Yuengling is a hell of an upgrade from Lone Star!

 

[Mules]

Off subject, but I have long admired this custom build. I vote it easily as the best on this or any other side. Quality of build, ingenuity, fit finish, cool factor are just off the chart!
Well done!

Thank you sir. You guys are going to convince me one day to sell these!

 

[Mules]

Power Supply:
Pecron E600LFP power supply/solar generator. I haven't added solar collectors yet.

It has an extremely fast charging rate, a large inverter and is inexpensive. I love it, but I might go for the larger size next time like the Pecron E2000FLP. I occasionally have to idle my truck to charge the power supply. Not a big deal.

 

[Flyin6]

Thank you sir. You guys are going to convince me one day to sell these!

If you could control quality and production once your business took off you would go far. Consider me as a test dummy (not literally please) I have a good-sized forum that I would share the build on. Your setup over the IKamper I use is a huge step up. In any event, My hope would be for this to be a profitable and satisfying venture for you.

Sponsored