Tazer mini non menu live functions help please

[Gasman]

I have a 20 gladiator with a tazer mini on it, I need some help with. I leave the tazer on the Jeep and according to tazer instructions under non- menu live functions I should be able to disconnect my front sway bar in two wheel drive same way with lockers but I cannot get it do that, any ideas would be appreciated. Thanks

Sponsored

 

[Gvsukids]

I have a 20 gladiator with a tazer mini on it, I need some help with. I leave the tazer on the Jeep and according to tazer instructions under non- menu live functions I should be able to disconnect my front sway bar in two wheel drive same way with lockers but I cannot get it do that, any ideas would be appreciated. Thanks

Do you need to set a button?

 

[Gasman]

According to instructions I thought the non- menu live features should work I must be missing something though, hoping some other tazer users had some thoughts and maybe help.

 

[wcberry]

What speed are you at when you push the Sway Bar button?

Sway Bar in 2WD: Press SWAY BAR while in 2WD and it will disconnect or re-connect as if it were in 4WD. It will automatically re-connect at 30MPH and disconnect when the Jeep comes back to a full stop.

See “SwayKill” in Button Remap section for full sway bar control.

• disconnect sway bar in 2WD up to 30mph or at any speed if mapped to a button

 

[Gasman]

I have tried it setting still and multiple speeds less than 30 mph does yours work ?

 

[sharpsicle]

What trim Gladiator do you have?

 

[Gasman]

Rubicon

 

[Thunderspud]

You aren’t alone. I noticed the same when I first installed the Tazer. I didn’t really look into at all that much after. I suppose it was possible it was user error. That said, in practice, it hasn’t mattered. At least for our neck of the woods, seems almost all the places I want the sway bar disconnected I’m on a surface where chucking it into 4hi isn’t a big deal. Guess I mainly use the disconnect for comfort on forest service trails.

 

[Bruticus Maximus]

I had the same experience as Thunderspud above. I noticed it didnt work when I first set my tazer up, but I never followed through to diagnose, as every time Ive wanted to disconnect, it is when crawling.

 

[Lance]

Near as I can tell the Tazer mini works when I use the sway disconnect button at a full stop and stays disconnected to 30 like they say 2wd or 4wd.
In 4wd if I'm moving, the Rubicon systems works (takes over :-() and reconnects about 18. blinking warnings over 16 on dash.

Maybe multiple reboots help? When I changed tire size it took 3 reboots just to get the tire change to stick.

If I could just get the backup cam to stay on when I use the apps would be useful

 

[Gasman]

Thanks

Sponsored