What can we do for you?

[Beemer533]

Benny - part number and price for front body bolt? The big long bolt with 3 tubes of Loc-tite spread all over all threads that holds the body to the frame......

This is part of it...........the rest is solidly glued up into the body ->

Man, that sucks.. I just did mine and I was blissfully unaware of this possibility...

I was thinking about replacing my bolts though after reading about these breaking but I'm debating on whether or not it's worth messing with them now ..

Benny can confirm but these are what I have in my cart currently...

Front bolts: 06512962AA

Middle bolts: 6508326AA

Rear bolts: 06512897AA

Sponsored

 

[Lunentucker]

Benny - part number and price for front body bolt? The big long bolt with 3 tubes of Loc-tite spread all over all threads that holds the body to the frame......

This is part of it...........the rest is solidly glued up into the body ->

I think this gets you in the neighborhood.
https://parts.allmoparparts.com/oem...xJmw9MSZuPVJlY29tbWVuZGVkIFByb2R1Y3RzJms9MQ==

 

[Lunentucker]

 

[ShadowsPapa]

Man, that sucks.. I just did mine and I was blissfully unaware of this possibility...

I was thinking about replacing my bolts though after reading about these breaking but I'm debating on whether or not it's worth messing with them now ..

Benny can confirm but these are what I have in my cart currently...

Front bolts: 06512962AA

Middle bolts: 6508326AA

Rear bolts: 06512897AA

I have heard from at least two sources - one was Jerry, forum member who helped with our JLU steps, that if you are going to have trouble, it's almost certainly the left front. Well, I can confirm - the left front on the JLU was the toughest of them all, but I got it, and the trouble on my JT is indeed the left front.

 

[ShadowsPapa]

Man, that sucks.. I just did mine and I was blissfully unaware of this possibility...

I was thinking about replacing my bolts though after reading about these breaking but I'm debating on whether or not it's worth messing with them now ..

Benny can confirm but these are what I have in my cart currently...

Front bolts: 06512962AA

Middle bolts: 6508326AA

Rear bolts: 06512897AA

This is a bit confusing - A pillar is of course the front of the three, by the windshield.
B is typically the one right back of the front door.
C is the rear-most pillar

So when I see this - I wonder - which is it?
It says body cushion to frame A and C which means the front and rear...

Now compare prices - and look at the sizes - almost the exact same size, off by roughly 1 mm - 6 times the cost! and shorter by 1mm

This has reminded me that it's not the "front" bolt I need, it's the front of the three that are by the rocker panel pinch weld area, under the A pillar, behind the axle.
I don't need the true front bolt as that's ahead of the axle, near the area of the steering gear.

So it's the one sort of below the A pillar, or front door hinge area, about where a front mud flap would line up with.

I have to think "front of the three by the rocker panel" not the REAL front one ahead of the axle.

 

[ShadowsPapa]

I was not thinking completely when I said "front". The fronts are near the engine bay, on the left, near the steering gear.
I should have been careful in terminology - "my front" is the front of the 3 needed to mount the steps. It's the front of the three between the axles. My front would be the second one back on each side, just behind the front wheels. They are right about where a mud flap would be, almost right under the windshield.
I didn't keep in mind there are REAL front mounts that are ahead of the axles.

So when I say front, I should be clear - not the real front that a parts person would look up, but the second one back, the first one behind the front wheel. The "A pillar" body mount bolt, just about straight down from the cowl or rear edge of the hood, right behind the front wheel. It's the one they use 3 tubes of locking compound on so that the locking compound is so thick you can't even tell there's threads on the bolts.

I was going to remove each bolt fully and clear their locking compound off but they have retainers that hold the bolts up in place so that even when fully unscrewed from the body mount, you can't just pull the bolt down and out. You can unscrews them so they are out of the threads, but you can't drop the bolt out. (not without real force)
You can see it here - along with 8 ounces of the Loctite they use on these A pillar body bolts.

 

[Beemer533]

This is a bit confusing - A pillar is of course the front, by the windshield.
B is typically the one right back of the front door.
C is the rear-most pillar

So when I see this - I wonder - which is it?
It says body cushion to frame A and C which means the front and rear...

Now compare prices - and look at the sizes - almost the exact same size, off by roughly 1 mm - 6 times the cost! and shorter by 1mm

This has reminded me that it's not the "front" bolt I need, it's the front of the three that are by the rocker panel pinch weld area, under the A pillar, behind the axle.
I don't need the true front bolt as that's ahead of the axle, near the area of the steering gear.

So it's the one sort of below the A pillar, or front door hinge area, about where a front mud flap would line up with.

I have to think "front of the three by the rocker panel" not the REAL front one ahead of the axle.

To be honest, I hadn't really thought about the "real" forward body mount by the grill..

I found the part numbers On northridge4x4.com, they have a diagram showing where the bolt is. It's not in the screen capture, but they call out number 10 as being the forward body mount bolt below the a pillar..

I suppose we'll have to wait for Benny to confirm, I am far from a Mopar parts expert lol...

 

[AllMoparParts.com]

First time Gladiator owner my Jeep has the 7” upgrade from the 5” only problem is it’s a bone stock sport no power locks or windows ( I am an old fashioned kind of guy ) and I am really missing the volume and tuner knobs is there a center stack that will help fix this problem 2021 gladiator thanks for any help you can offer

Please send me your VIN and I will look into the center stacks

- Benny

 

[AllMoparParts.com]

I cannot confirm placement because our data does not show locations.

6 Bolts are used (2 Each) with all bolts being M12x1.75 , Only the length differs.

Part # 6512962AA 107.50 mm long

Part # 6508326AA 116.50 mm long

Part # 6512897AA 215 mm long

No image at this time



- Benny

 

[GCHunter]

Hey Everyone!

We are happy to have the chance to support a dedicated forum specifically for Gladiator's. We feel some of the best information and knowledge come from such forums.

A bit about us now. We are a Jeep dealership located in New York, We proudly own and operate AllMoparParts.com for almost 10 years now and strive to bring you everything and more your Dealership's Parts department can offer while saving you money as well.

Please take a few minutes to browse our online store within the link below. We have access to every part or accessory offered by Jeep so if there is something your looking for please reply below and we will be happy to help. We also offer forum discounts for members so please be sure to PM me before making any purchase.

Thank you,
Benny

https://www.allmoparparts.com/

I realize the post is old, but thank you for stepping forward and making yourselves available for questions.

 

[MojaveMags]

Does anyone know what this is for? Bought a new to me 2020 Mojave. This was in the glove box and I cannot for the life of me figure out what this is for?

It's got 3 different numbers on it.
Mopar - 6LG39TRMAA
13798<<< PC+ABS
939785R RH

I Googled it but couldn't find anything.

 

[AllMoparParts.com]

Does anyone know what this is for? Bought a new to me 2020 Mojave. This was in the glove box and I cannot for the life of me figure out what this is for?

It's got 3 different numbers on it.
Mopar - 6LG39TRMAA
13798<<< PC+ABS
939785R RH

I Googled it but couldn't find anything.

Rear seatback release bezel. I believe its located on the top right of the rear seatback.

- Benny

 

[kgc]

It looks like steering gears are on backorder again.... Any guess on when they'll be available? Newest part number appears to be 68551690AE.

Thanks!

 

[AllMoparParts.com]

Yes they are on backorder again, The last one we ordered took 60 days to arrive.

Please let me know if you have any other questions.
Thanks,
-Benny

 

[Rammer500]

Benny. I need a front steel bumper and skid plate. Price shipped and availability. Thanks

Sponsored