What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[MojaveLawyer]

Inspected the suspension and found a couple out of spec

Seeking some input on the following components. Is the Tie Rod and Drag Link ready to be replaced?

Cheers

X

Sponsored

 

[MrBones]

Haulmaster tailgate ladder from Harbor Freight. Note to self: Make sure the lynch pins are flipped away from the edge of the tailgate before closing.

 

[Yona]

Drive 6k miles over 2 weeks from ohio to glacier to moab and Telluride. Mounted some badges today still waiting on a backorder but man was it fun even in 110 heat

 

[TheSolarWizard]

Haulmaster tailgate ladder from Harbor Freight. Note to self: Make sure the lynch pins are flipped away from the edge of the tailgate before closing.

that resolves any suspicions I had about this working for my Jeep. My bed is about to be way taller

gonna stick with my original plan to carry a folding ramp

 

[antwon412]

Haulmaster tailgate ladder from Harbor Freight. Note to self: Make sure the lynch pins are flipped away from the edge of the tailgate before closing.

is your truck lifted? And what model is it?
I’m thinking this would be great for me to get up into my bed for my camper, but I am on a 2 to 3 inch lift with 37 inch tires. Concerned that the letter either wouldn’t touch the ground or would be completely vertical.

Thanks!

 

[Rusty PW]

Inspected the suspension and found a couple out of spec

Seeking some input on the following components. Is the Tie Rod and Drag Link ready to be replaced?

Cheers

X

Have someone turn the steering wheel back and forth. As they are doing that. Look for movement in the rod ends. Shouldn't be any. Twisting really doesn't show wear.

 

[MrBones]

is your truck lifted? And what model is it?
I’m thinking this would be great for me to get up into my bed for my camper, but I am on a 2 to 3 inch lift with 37 inch tires. Concerned that the letter either wouldn’t touch the ground or would be completely vertical.

Thanks!

Standard height Mojave. It’s the harbor freight model. About 36-38 inches from bed to ground. I have it adjusted to maximum width of the bed. It can be adjusted for more height but you would need to readjust it to make it fit in the bed

 

[biplaneguy]

While waiting for a can of refrigerant to get sucked into my wife's Tiger camper I peeled the dealer stickers off my Jeep's tailgate.

 

[NHyde]

Installed the new midsize single drawer decked system this weekend. I was tired of having bins upon bins for my camping gear, along with not having a good spot to groceries when the cab is full of kids!

So far, I am loving it. Install was a breeze and I am awful at installing things. Feeling pretty proud and happy

 

[TheSolarWizard]

Installed the new midsize single drawer decked system this weekend. I was tired of having bins upon bins for my camping gear, along with not having a good spot to groceries when the cab is full of kids!

So far, I am loving it. Install was a breeze and I am awful at installing things. Feeling pretty proud and happy

Is it the same height just 1 drawer vs two?

 

[NHyde]

Is it the same height just 1 drawer vs two?

Looks like it, I am not familiar w/ the old one.

 

[Dickster]

Finished up the Huracan tailgate storage and played with the new Go Rhino jack.

 

[Wolf Island Diver]

I bought an Overland Gear Guy tailgate bag before realizing that my fridge and slider won’t clear the mounting panel’s clips with my tailgate cover in place. I made some mods to make it work.

I cut the OGG mounting panel and secured it to the underside of the tailgate cover with screws. The other benefit of this is that I can leave the panel attached but not flopping around on the outside of the truck.

I also changed the shovel mount to better display my handiwork…

 

[Mtn Lion]

Impromptu bed rail spare mount. 37x12.5x17 on 1/2-13 all thread with a spring and a drilled/tapped steel wing "nut". Used some heat shrink wrap to sleeve the all thread.

 

[SnazzGlad]

Got my self legal and replaced my 3rd brake light. Probably been out for a year and never got pulled over. Since I’m headed down to the Jeep Invasion figured I should replace it since cops maybe looking harder for reasons to stop people on my 550 mile drive down there. Easy job, didn’t even finish my beer before it was finished lol.

Sponsored