What do u have coming in the mail?

[WILDHOBO]

I bet you could get them to sell you one. its about 1.25" wide and 8" long

Is that on the side of the tent hard shell?

Sponsored

 

[BringTheLightnin]

Since I am finished with my gladiator I have a blow up doll on the way and I hope she is blonde

Great for the carpool lane

 

[chorky]

Is that on the side of the tent hard shell?

The 'life is a beautiful ride' trademark plate is on the aluminum. It is laser etched and painted (or maybe anodized) aluminum plate, that looks to be adhered by just your standard 3M tape.

 

[WILDHOBO]

The 'life is a beautiful ride' trademark plate is on the aluminum. It is laser etched and painted (or maybe anodized) aluminum plate, that looks to be adhered by just your standard 3M tape.

Slick. I might call them. Thx

 

[Chunky White]

Rugged Ridge 9" antenna

It will hopefully pick up all the radio stations I have programmed and will definitely be better in the drive through car wash than the stock one which I am sure will break off eventually if not replaced

 

[XraytecH]

Bunch of stuff to fix a leaking rear pinion seal.

https://www.amazon.com/dp/B071SFBRJK?psc=1&ref=ppx_yo2ov_dt_b_product_details
https://www.amazon.com/dp/B000Q8GVPY?psc=1&ref=ppx_yo2ov_dt_b_product_details
https://www.amazon.com/dp/B06XP5J2X1?psc=1&ref=ppx_yo2ov_dt_b_product_details
https://www.amazon.com/dp/B09F64CWFB?psc=1&ref=ppx_yo2ov_dt_b_product_details
https://www.freedomracing.com/9684a-pinion-flange-seal-installer-9684.html
https://www.mymoparparts.com/oem-parts/mopar-bolt-kit-68400272aa
https://www.danaaftermarket.com/spi...LA&cat3=SL&cp=0&catalog=PIMS_NA&partType=PART
https://www.mymoparparts.com/oem-parts/mopar-pinion-flange-68474261aa

 

[mog]

According to my Amazon app I need to order a trebuchet

 

[4xjeepr]

Every home security system needs a trebuchet. It is no longer a niche market.

According to my Amazon app I need to order a trebuchet

 

[RedChili]

Had a Bulletpoint Rubigrid dash mount coming in, but only the phone stick and end caps arrived…someone at Amazon must have taken/forgotten to put the rest of the parts in the package…

 

[Camaroboi13]

Got some Rusty’s 4” diesel springs coming, and four schedule 40 90 degree bends so I can weld some steps onto the factory sliders for my wife to get in and out once the 4” springs go in.

Also have a battery disconnect switch and 3 feet of power wire to make up for the fact that the leads on my winch were 19 inches too short

 

[chorky]

Bunch of stuff to fix a leaking rear pinion seal.

https://www.amazon.com/dp/B071SFBRJK?psc=1&ref=ppx_yo2ov_dt_b_product_details
https://www.amazon.com/dp/B000Q8GVPY?psc=1&ref=ppx_yo2ov_dt_b_product_details
https://www.amazon.com/dp/B06XP5J2X1?psc=1&ref=ppx_yo2ov_dt_b_product_details
https://www.amazon.com/dp/B09F64CWFB?psc=1&ref=ppx_yo2ov_dt_b_product_details
https://www.freedomracing.com/9684a-pinion-flange-seal-installer-9684.html
https://www.mymoparparts.com/oem-parts/mopar-bolt-kit-68400272aa
https://www.danaaftermarket.com/spi...LA&cat3=SL&cp=0&catalog=PIMS_NA&partType=PART
https://www.mymoparparts.com/oem-parts/mopar-pinion-flange-68474261aa

not warranty?

 

[ih800a]

D&C Designs cowl ditch lights and side markers are on the way.

https://dandcdesigns.net/product/lucid-vsl/

 

[WILDHOBO]

D&C Designs cowl ditch lights and side markers are on the way.

https://dandcdesigns.net/product/lucid-vsl/

One of my favorites. You’ll love them.

 

[XraytecH]

not warranty?

Had it re-geared and taking this opportunity to learn how to change a pinion seal.

 

[NeatFreq]

Yaesu FTM-200DR
CometCA2x4SRNMO antenna

Time to get comms on the rig!

KK4NGS

Sponsored