Is regearing a TrackLok LSD any different ?

[1996XJ]

I am about to dive into modifying my Sport S but not sure where I want to start first. If I go regear to get bigger tires, can I keep the LSD as it is? I have next to no miles on it and do not plan on doing lockers unless this thing wears out or long down the road decide I need them.

Sponsored

 

[CrazyCooter]

Nuts and bolts just like an open diff, but without the wiring of an E-locker.

 

[1996XJ]

Nuts and bolts just like an open diff, but without the wiring of an E-locker.

Cool so it should not be more expensive than a non LSD diff?

 

[CrazyCooter]

Cool so it should not be more expensive than a non LSD diff?

Labor cost should be the same? Is that what you are asking? Same parts?

 

[1996XJ]

Labor cost should be the same? Is that what you are asking? Same parts?

yeah sorry i should of been more specific. Like the cost to regear an LSD would probably be the same as anything else.

 

[ShadowsPapa]

yeah sorry i should of been more specific. Like the cost to regear an LSD would probably be the same as anything else.

Like the man said - same parts (bearings, seals, gears) and labor as the LSD is inside the carrier. They won't even have to open the carrier itself.

 

[CrazyCooter]

You live in the right place to get it done dirt cheap if you can believe that........ Seen shops quoting less than $2k otd!

 

[1996XJ]

You live in the right place to get it done dirt cheap if you can believe that........ Seen shops quoting less than $2k otd!

Cool man let me know if you know of any with good reputations. My cousin has one he wants me to check out. I'm not always out to pay the cheapest sometimes its nice to pay a little extra for good work done right.

 

[CrazyCooter]

Cool man let me know if you know of any with good reputations. My cousin has one he wants me to check out. I'm not always out to pay the cheapest sometimes its nice to pay a little extra for good work done right.

I cant refer you to any down there and I don't honestly know what you are getting for less than $2K. It's about $3K up in my neck of the woods for a complete job and good warranty from a reputable shop.

 

[1996XJ]

I cant refer you to any down there and I don't honestly know what you are getting for less than $2K. It's about $3K up in my neck of the woods for a complete job and good warranty from a reputable shop.

Thanks again. While I ask around, for shits and giggles I'm going to get a quote from the dealer and see what they say.

Sponsored