Rear Bed Sliders?

[SoK66]

To get some protection for the underside of the bed sides I see some Gladiators have small sliders that go between the rear wheel house and the rear bumper. Anyone know of the vendor who makes those?

Sponsored

 

[kevman65]

You're probably seeing the Rubicons, they are a factory item. They integrate with the rear bumper.

There are several aftermarket versions out there, but again most of them integrate with a rear bumper.

 

[SoK66]

You're probably seeing the Rubicons, they are a factory item. They integrate with the rear bumper.

There are several aftermarket versions out there, but again most of them integrate with a rear bumper.

Thanks!

 

[TheSolarWizard]

if you're ok trimming the bed a little (and its not structural or hard to do where these go), these are a great option and much higher up than the rubicon rails to begin with https://www.heptamfg.com/products/jeep-jt-bed-slider

also vastly superior strength wise to all but one other option but that one also requires using their bumper

 

[Boostnu]

https://www.extremeterrain.com/redrock-4x4-jeep-gladiator-bed-side-rock-rails-jg2317.html
A lot of people use these but you have to trim the bumper for them.

 

[5chema]

if you're ok trimming the bed a little

The original Rubicon factory option doesn’t requires trimming with the rear steel bumper. However, you also need some trimming if you keep the rear plastic bumper.

https://www.jeepgladiatorforum.com/...rails-on-overland-and-sport-gladiators.21140/

 

[Geoarch]

To get some protection for the underside of the bed sides I see some Gladiators have small sliders that go between the rear wheel house and the rear bumper. Anyone know of the vendor who makes those?

Extreme Terrain sells them.

 

[ALT2870]

They also come on the Freedom Edition as well. Will onto steel rear bumpers no problem but plastic ones require very minor trimming.

 

[5chema]

Anyone know of the vendor who makes those?

Some ideas:

https://www.jeepgladiatorforum.com/forum/threads/rear-bed-sliders-protection.77660/post-1268366

 

[MemphisMississipp]

https://www.extremeterrain.com/redrock-4x4-jeep-gladiator-bed-side-rock-rails-jg2317.html
A lot of people use these but you have to trim the bumper for them.

I bought some of these last week. Not hard to install and the bumper trim is easy with the right scissors. I got some crazy looking scissors from harbor freight that cut through the plastic like cutting through cardboard. Trim for the edges you cut is included in the kit.

 

[TheSolarWizard]

The original Rubicon factory option doesn’t requires trimming with the rear steel bumper. However, you also need some trimming if you keep the rear plastic bumper.

https://www.jeepgladiatorforum.com/...rails-on-overland-and-sport-gladiators.21140/

True but the sliders I posted require cutting out that weird little pocket underneath the plastic on the bed

 

[djthumper]

https://dv8offroad.com/collections/...oducts/jeep-gladiator-bedside-sliders-srgl-01 I put these on mine.

 

[Boostnu]

Red rocks from extreme terrain. I made a template for the bumper using the slider then cut the bumper using a dremel.

Sponsored