Tazer JL Mini issue with cruise control

[Jaydebe]

So I found this to be a bit concerning g, figured I’d throw it out there. I turned my seatbelt chime off using my tazer, and had to do a unmarry/full reset as I noticed my reverse lights weren’t coming on after driving forward (lights worked fine if I started ,went straight to reverse, but nothing if I drove forward first.) and after multiple full resets and a few days driving without the tazer, I found the chime didn’t turn back on and tpms did not reset to stock. Makes me wonder what else is not returned to default when unmarried.

Did you ever get this to work correctly?

I'm looking at one of these for my JTR; but these stories going on consistently for about a year straight is a tab worrisome.

Sponsored

 

[jmdwifi]

Did you ever get this to work correctly?

I'm looking at one of these for my JTR; but these stories going on consistently for about a year straight is a tab worrisome.

My phone buttons quit working right for a while, then started working again for a while. I just added a front camera and enabled it in the settings. Now my phone buttons are goofy again. I hope it just straightens out like before.

 

[Jzmattingly]

I unmarried/updated firmware/remarried and resolved the issues with mine.

 

[jmdwifi]

I have a new issue. I am on the latest firmware and twice in the last few days, all my lights went out. Once while going 70MPH on the interstate at night and the last time was night before last going down a dark mountain road. Both times were after touching the cruise control button. I use CC a lot, so it's not every time. After the second time, I pulled over and unmarried. Threw that bitch in the glove box. I think I will just pay the dealer to activate my aux switches and front camera. ESS will just have to be a bitch I guess.

 

[The Sigma]

Piping in here to bring the Tazer Mini topic back to the top of the list.

In summary:
- I have a manual 2020 Rubicon on 37s with the stock 4.10s.
- Had it re-geared this week to 4.88s, no change in tire size.
- errors popped up immediately with 1) ESS, 2) ACC, 3) the selected gear (that usually shows above the mileage disappeared), and 4) reverse camera stopped working

- even though the 6th Gear supplemental relearn says it's only needed when changing tire size, I was at a loss and figured, why not?

The first time I did it - it did not work.

Tip: open your door to make sure the interior lights do not turn on. Found out mine did after the relearn did not work the first time. Discovered that disconnecting the negative wires from the main battery still left power flowing from the aux battery.

After pulling the negative wires off of the main battery * * * you need to separate the TWO negatives that were attached together on the main battery * * * this will knock out power to the aux battery (i.e. the interior lights no longer worked)

- I did the 6th Gear supplemental relearn... the second time - worked like a charm

Hope this saves someone in the future from ripping their hair out in frustration

 

[Stryker6040]

Bringing this back from the dead has anyone found a fix or the cause? Been using this in my 21 since a few months after buying it new. No issues marrying, changing settings, unmarrying for service appointments etc.

Had to bring the jeep in for service, so I unmarried the unit, did the full reboot and sleep cycles, put it back to stock, had service done at dealership, got it back, remarried the tazer mini, full reboot, two sleep cycles , now got no acc or even normal cruise. Within 30-45 seconds of starts service errors flash with warning lights. You can turn on CC before it errors out and it seems to turn on as normal, then quits

tried the whole unmarry again update firmware, everything suggested here still have the no cruise lights/error.

 

[Stryker6040]

Bringing this back from the dead has anyone found a fix or the cause? Been using this in my 21 since a few months after buying it new. No issues marrying, changing settings, unmarrying for service appointments etc.

Had to bring the jeep in for service, so I unmarried the unit, did the full reboot and sleep cycles, put it back to stock, had service done at dealership, got it back, remarried the tazer mini, full reboot, two sleep cycles , now got no acc or even normal cruise. Within 30-45 seconds of starts service errors flash with warning lights. You can turn on CC before it errors out and it seems to turn on as normal, then quits

tried the whole unmarry again update firmware, everything suggested here still have the no cruise lights/error.

Only reply I could get out of Tazer was unmarry, full reboot 2 sleep cycles, completely unacceptable, have not responded to my replies

Sponsored