JTR OEM Steel Bumper Close outs

[Phishs]

I am interested in a set

Sponsored

 

[NateSamJT20]

I’d be interested in buying whoever/whichever smarter person here can make some first!

 

[pokey02]

Maximus-3 made these finishing plates for the JK 10a/ Hard Rock factory steel bumper. I think it's the same bumper on the JL.

This is what I have for my JKUR 10A steel bumper....

https://maximus-3.com/10ax-and-hard-rock/front-bumper-end-caps-fog-light-guards

This is what they look like installed on the 10th anniversary edition stock steel bumper:

 

[xdamageincx]

Too bad they aren't rounded on the ends.
I will get the impression this weekend.

 

[JTR178]

I'd also be interested in a set.

 

[R0BSTR0SITY]

Definitely interested in a set.

 

[Speedy_12139]

any real updates? has anybody successfully printed/cut a set??

I'm ready to buy, pending installed pics, paypal ready.

 

[Dlish]

I dont have the bumper, but if someone has a cad file (solid, dwg, etc etc) i can try to run a set for fitment

 

[DocMcStuffins]

any real updates? has anybody successfully printed/cut a set??

I'm ready to buy, pending installed pics, paypal ready.

Took me about 4 hours, a scrap piece of aluminum, Rustoleum truck liner spray can, and a sore body. Definitely keeping my day-job.

 

[ArmyMP]

I'd love a 3d printed set

 

[atxatxatx]

Took me about 4 hours, a scrap piece of aluminum, Rustoleum truck liner spray can, and a sore body. Definitely keeping my day-job.

Looks great

 

[ConqSoft]

Old thread, but I didn't see anyone mention these. I've used these in the past:

JL / JT Steel Bumper Closeout Panels – Utah Design Foundry

 

[Mikey B]

Greetings! Was doing some cruising and ran across this thread.. I designed some specific 3D printed parts for my TJ and made these closeouts for my 2025 JLU. Was considering refining them and selling. Feedback is welcome.

Wasn't super thrilled with standoff but to keep the connector wiring clear on the 2025 the needed some standoffs. (Yes I know the bolts are not installed).

To clarify, these are 3D printed from ABS plastic and I can put words or flat stencils on them. I did this for my KC lite covers.

NWO = No Worries Offroad. I'm on Instagram as well.

 

[Fishee]

Greetings! Was doing some cruising and ran across this thread.. I designed some specific 3D printed parts for my TJ and made these closeouts for my 2025 JLU. Was considering refining them and selling. Feedback is welcome.

Wasn't super thrilled with standoff but to keep the connector wiring clear on the 2025 the needed some standoffs. (Yes I know the bolts are not installed).

To clarify, these are 3D printed from ABS plastic and I can put words or flat stencils on them. I did this for my KC lite covers.

NWO = No Worries Offroad. I'm on Instagram as well.

I like them. Mine are still open since i can't find ones I like, or find some that I do that are WAY overpriced. I would be interested depending on price.

 

[Fishee]

Greetings! Was doing some cruising and ran across this thread.. I designed some specific 3D printed parts for my TJ and made these closeouts for my 2025 JLU. Was considering refining them and selling. Feedback is welcome.

Wasn't super thrilled with standoff but to keep the connector wiring clear on the 2025 the needed some standoffs. (Yes I know the bolts are not installed).

To clarify, these are 3D printed from ABS plastic and I can put words or flat stencils on them. I did this for my KC lite covers.

NWO = No Worries Offroad. I'm on Instagram as well.

Got my closeouts installed and they are perfect in my opinion. Great fit even allowing for a cutout where the wires can pass through (see pic). Definitely recommend. I just went with all black and no logo and it looks like what should have come with the bumper to begin with. I'm glad someone FINALLY came up with a 3d printed set.

Sponsored