What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[JTguy2020]

In case your asking about the lights I installed, I do have the AUX switches. But, if you do not, the lights I bought come with a really nice harness that includes a relay, switch and fuse all pre-wired. The lights are very BRIGHT. It was hard to capture in a picture, but I took a ride in the evening down some rural roads and they really lit up all the dark areas left by the stock lights/fog lights.

Here's a link to a bracket that will support two lights on each side. CLICK HERE

I just purchased them. they should arrive tomorrow! woo hoo! thanks again tweak89

Sponsored

 

[TTEChris]

Get that thing outside and post some more pictures in the Photos thread please...

Outside Pic

Deleted the front lower fenders and installed a Quake LED/DRL kit. I also installed some cheap Amazon fender liners that I was able to get next day, but I wouldn't wish those on my worst enemy(Almost a direct knock off of the Artec kits as far as mounting is concerned, but nothing fits the way it should )
I need to delete the rear lowers, but I haven't found any liners for the back on the Gladiator yet.

 

[JTguy2020]

That is some serious flex! it is gonna look awesome once your wheels and tires are on. Your Jeep looks incredible as is though.

Outside Pic

Deleted the front lower fenders and installed a Quake LED/DRL kit. I also installed some cheap Amazon fender liners that I was able to get next day, but I wouldn't wish those on my worst enemy(Almost a direct knock off of the Artec kits as far as mounting is concerned, but nothing fits the way it should )
I need to delete the rear lowers, but I haven't found any liners for the back on the Gladiator yet.

absolutely fkn flawless!!! HOTTT DAMMMMN!!!

 

[Markpod7]

Well, this is more like what have I done since picking up the Jeep on 8/3:
Grayed out silver trim on overland
Tinted orange side markers
DIY Cquartz ceramic coat

Just need some aggressive A/T badly

Which stubby antenna did you get? How does it work?

 

[Troybilt]

Outside Pic

Deleted the front lower fenders and installed a Quake LED/DRL kit. I also installed some cheap Amazon fender liners that I was able to get next day, but I wouldn't wish those on my worst enemy(Almost a direct knock off of the Artec kits as far as mounting is concerned, but nothing fits the way it should )
I need to delete the rear lowers, but I haven't found any liners for the back on the Gladiator yet.

I was so happy with my JTR but after seeing your rig not so much any more. Tomorrow I will drive it to the county landfill park it on the huge pile of garbage and walk home in shame

 

[Gregbj33]

LED fogs

 

[Krazy]

I was so happy with my JTR but after seeing your rig not so much any more. Tomorrow I will drive it to the county landfill park it on the huge pile of garbage and walk home in shame

Could I Have the location of the county landfill park please?

 

[TTEChris]

I was so happy with my JTR but after seeing your rig not so much any more. Tomorrow I will drive it to the county landfill park it on the huge pile of garbage and walk home in shame

Thanks, I think
I'm sure it's nice to have all that money in your pocket and not having to constantly think about axles, bigger brakes, more power etc... I bough my Gladiator with intent to tow my Wife's JL to offroad events etc, but now it looks like her Jeep may be the better tow rig than mine .

 

[Jeep Rigg]

Thanks, I think
I'm sure it's nice to have all that money in your pocket and not having to constantly think about axles, bigger brakes, more power etc... I bough my Gladiator with intent to tow my Wife's JL to offroad events etc, but now it looks like her Jeep may be the better tow rig than mine .

Nope... unnnahhh I'd take debt and maybe even divorce to own your rig @TTEChris. Hell, at this point, I'd take just the spare time you actually have to work on your rig. I was stoked when I found time to installed the stubby antenna (estimated time to install it, less than 1 minute, which was about the same amount of time it took my 3 year old to track me down, and I dont even like the antenna). Anywho, sweet ride man, not sure how it fits under a 82" garage door opening but amen to you for that black magic voodoo you got going on over there.

 

[TTEChris]

Nope... unnnahhh I'd take debt and maybe even divorce to own your rig @TTEChris. Hell, at this point, I'd take just the spare time you actually have to work on your rig. I was stoked when I found time to installed the stubby antenna (estimated time to install it, less than 1 minute, which was about the same amount of time it took my 3 year old to track me down, and I dont even like the antenna). Anywho, sweet ride man, not sure how it fits under a 82" garage door opening but amen to you for that black magic voodoo you got going one over.

Thanks again!

I'm lucky to have a wife and 4 younger boys(4-11yrs) that like to get involved. It also helps that I own a shop and can work on my Jeep when I do have down time.

What's crazy is I easily clear that garage. I had my wife measure when I pulled in this evening and I still have 3-4" by her measurements.

 

[Jeep Rigg]

Thanks again!

I'm lucky to have a wife and 4 younger boys(4-11yrs) that like to get involved. It also helps that I own a shop and can work on my Jeep when I do have down time.

What's crazy is I easily clear that garage. I had my wife measure when I pulled in this evening and I still have 3-4" by her measurements.

Well, by my quick estimated calcs, and what i have been telling my wife 6" really is, you must have about a foot of clearance over there then!!!

 

[Texops]

Outside Pic

Deleted the front lower fenders and installed a Quake LED/DRL kit. I also installed some cheap Amazon fender liners that I was able to get next day, but I wouldn't wish those on my worst enemy(Almost a direct knock off of the Artec kits as far as mounting is concerned, but nothing fits the way it should )
I need to delete the rear lowers, but I haven't found any liners for the back on the Gladiator yet.

That is one sexy beast! Congratulations

 

[Mofo67]

Just added a bed cover. Fit is great and installing was very simple.

 

[JTguy2020]

I was so happy with my JTR but after seeing your rig not so much any more. Tomorrow I will drive it to the county landfill park it on the huge pile of garbage and walk home in shame

LMFAO! STAAAAAHHP!!!!! ALL of our JT's are special. some people just have MORE to do with them... like this guy.. ok im with you. ill drop my JT off with a sign that says FREE!

 

[JTguy2020]

Just added a bed cover. Fit is great and installing was very simple.

IS THIS THE roll up? tri fold? easy installation?

Sponsored