2021 sport s max tow with 2" mopar lift - looking for recomendations for 3/4" or 1" level spacer

[mtudb24]

All
Truck is getting ready to receive upgrades as soon as it arrives to dealer
Dealer will install 2" mopar lift
Qudratech retro wagon wheels
35" General ATX's
Quadratech bumper with 12K winch
Blackhorse Rollbar

My question, is to level the truck after the winch is installed, what 3/4" or 1' spacer does everyone recommend
Thanks
Todd

Sponsored

 

[RodRecket]

Check out teraflex. Solid brand name and relatively inexpensive. It's what I installed on my truck and I'm happy with the results. You have the option of .5", 1", or 1.5"

 

[bastage]

Its a spacer... Daystar's 3/4" for the super high price of 40 bucks with amazon prime shipping is about as good as it gets.

 

[Phljeeper]

Its a spacer... Daystar's 3/4" for the super high price of 40 bucks with amazon prime shipping is about as good as it gets.

I second that. Just added these to the front and rear to get a little extra height and they work great and are super cheap.

 

[12BNNT]

Had similar issue putting 15k winch and bumper on my JTR dropped front end 3/4”. 35’s fit on stock JTR but needed a little lift for 37’s so I went with terraflex 1.5” front spacer and day star 3/4” rear resulting in 3/4” higher than stock front and rear for the 37’s to clear but kept factory rake for towing the camper or hauling stuff in the bed without being nose up. As stated, terraflex spacer is a 1” spacer and a 1/2” spacer (1.5” using both) and a taller bump stop so it gives you some flexibility to use more exactly what you need.

 

[GladiatoRic]

Very happy with 1.5” above a rubicon front coil (2” above stock max tow) and a 3/4” in the rear, retaining the stock max tow rear coils. This is however with rubicon fox shocks.

 

[Loosescrews]

Go at least 1” if you want it somewhat level. I went 1.5” Teraflex and its dead on.

 

[Mac]

Not sure what size spacer but I would go with Daystar, their spacers are one piece and replace the isolator, some other brands are multi piece and reuse the isolator so you end up with multiple pieces stacked together.

Sponsored