Lets see all those Gladiators with lifts and bigger tires!

[Aknowles09]

It may just be the angle. I've seen some pics that make 37s look small on two inch lifts and looks perfect on 3.5" lifts that makes me wish I had ordered a clayton's 3.5 instead of 2.5.

The BFG KO2’s are notoriously smaller than the stated size.. so these are on the smaller end of the 37’s that are out there. I love the tires though and honestly they really go good with the Clayton 3.5” lift on the JT Overland!

Sponsored

 

[Aknowles09]

Typically we recommend our 2.5" kit for Rubicons or vehicles with any kind of fender modifications in order to fit 37's but honestly I still love the way this truck looks!

Thanks guys! I’m super happy with the look and the performance of your lift! This thing is beefy!!

 

[hawkijon]

1. JT MOPAR 2” lift: (JTgas)77072468AB (JTdiesel) 77072469AC (JLdiesel) 77072399AE

1. RockKrawler rear track bar relocate bracket: RK07360K
2. Rancho front arm geometry relocation bracket: RS62118B
3. SteerSmarts track bar front: 75049001
4. SteerSmarts drag link with griffin attenuator: 78089002
5. MOPAR fox damper: 77072360
6. DayStar 3/4” level spacer: DAYKJ09191BK

 

[Volksbank11]

21 Glad with gun metal black Rhinos wrapped in TOYO OPEN COUNTRY20's. 2.5/3.0 SST ready Lift. I have the new AMP auto steps that have not been installed yet. Installed the Truck Hero BAK FLIP MX4

. I think i just turn 2K on JT and absolutely love the drive and feel.

 

[Foxtail]

21 Glad with gun metal black Rhinos wrapped in TOYO OPEN COUNTRY20's. 2.5/3.0 SST ready Lift. I have the new AMP auto steps that have not been installed yet. Installed the Truck Hero BAK FLIP MX4

. I think i just turn 2K on JT and absolutely love the drive and feel.

What is the offset of your wheels? The back wheels look like they are poking out of the fenders and the front looks flush with the fenders or is it just the camera angle?

 

[RumRunner]

2" mopar lift on Pro Comp 37s with 17" Pro Comp wheels

 

[Volksbank11]

What is the offset of your wheels? The back wheels look like they are poking out of the fenders and the front looks flush with the fenders or is it just the camera angle?

18 across the board

 

[Noreastern]

 

[TJDave]

Stinggray Max Tow-2" Mopar lift on 35's.
Bright White Rubicon-2.5" RC front, Mopar 2" lift lower front arms, Daystar 3/4" rear on 37's.

 

[bsanford]

2021 80th Anniversary, Iron Rock 2" level kit, Fuel Rims -12 with 35" BFG AT, Rough Country hard flip tonneau cover, LED headlight and fog light replacement, Rugged Ridge Nerf Bars, ordered (March delivery) Coverking Jeep Topliner and next up will be the bumpers!

 

[frost]

My Gladiator with 4.5" EVO springs (the rest of the kit is mostly metalcloak) and 41" Irok's with -38 offset wheels and chopped flares

Customers Gladiator I'm finishing up with a full 4.5" EVO lift, 40" Trail Grapplers and a -38 offset.

Hands down the best JT I've seen on this forum, and there are some good ones

 

[AlbizzleFoShizzle]

This is what it looked like with stock LE wheels and tires with Mopar lift. I’d say it was 2.5” higher although it’s advertised as a 2” lift.

those 37’s on stock wheels worked fine wheeling?

 

[Sorbs]

those 37’s on stock wheels worked fine wheeling?

Yup!

 

[1337bwr]

2.5 ready lift, 37/12.50/17 Patagonia MT, ion 171 -12 offset

 

[Volksbank11]

2.5 ready lift, 37/12.50/17 Patagonia MT, ion 171 -12 offset

Like the offset looks mean...

Sponsored