What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[FloridaJT6MT]

Finished my install on the Rough Country side Molle Panels. Dee Zee bed mat in. Very pleased. Have to make a slight adjustment for my tonneau cover to still fit. I’ll post pics of that once I finalize.

Sponsored

 

[mazeppa]

I need to connect these things to an aux switch for tailgaters, lol.

I did this, but set the aux switch to momentary in Uconnect, so I wouldn't be THAT old man driving around with the aux backup lights left on unknowingly.

Beware of starting a road rage incident by flashing a tailgaters, people are overly stressed and nuts out on the roads nowadays.

 

[Mdun71]

Added some eBay hood decals

 

[ShadowsPapa]

I did this, but set the aux switch to momentary in Uconnect, so I wouldn't be THAT old man driving around with the aux backup lights left on unknowingly.

Beware of starting a road rage incident by flashing a tailgaters, people are overly stressed and nuts out on the roads nowadays.

I'd not mind if there was a way to set those switches so it would be "on" only if not in any forward gear.
But these are so bright and I do check my mirrors, no way I'd leave them on when not sitting or backing.
Still want to rig a switch situation, just need to decide what switches I would want to go with, that sort of thing. I want it only for use when sitting with my trailer (or tailgating LOL)

 

[ShadowsPapa]

Added some eBay hood decals

I want!
Good quality? Good vinyl?

 

[jjs3845]

Put on my screen protector on my radio, installed Jeep cup holder coasters, and pulled apart my parking lights to see how they work so I can install Oracle fog lights with halos.

working on installing a tuxedo tonneau if it stops raining.

 

[Buttercup]

I did this, but set the aux switch to momentary in Uconnect, so I wouldn't be THAT old man driving around with the aux backup lights left on unknowingly.

Beware of starting a road rage incident by flashing a tailgaters, people are overly stressed and nuts out on the roads nowadays.

I was going to comment on that too. I'm sure it was said in jest but I did pass the "result" of a road rage incident leaving out of ATL this morning about 3am. Tailgater ended up "pitting" the tailgatee and then "finished" off the job with some lead. There was a "sheet on the street" as we call it. Just be safe.

I have mine on Aux 4. Many vendors sell a sheet of position specific stickers that cover up the "Aux" lettering with a specific tag and allow the "on" light to be visible. Someone had mentioned it would be sweet if someone like OTTRATW made up plates you could pop in to replace factory AUX 1,2,3,4.

 

[Buttercup]

I'd not mind if there was a way to set those switches so it would be "on" only if not in any forward gear.
But these are so bright and I do check my mirrors, no way I'd leave them on when not sitting or backing.
Still want to rig a switch situation, just need to decide what switches I would want to go with, that sort of thing. I want it only for use when sitting with my trailer (or tailgating LOL)

I wonder if there is a way to wire the on power to the Camera trigger? The lights would come on in reverse when the camera switch is energized but/and also you can turn your camera on via the APPS screen on Uconnect. So if'n you're with your trailer or sitting as you say, you could just pop the camera on and the lights would come on too. You'd still get the 15 second or so camera powered view when you hit the camera APP while traveling forward (car-sick mode). That would be enough to deter...

 

[Mdun71]

I want!
Good quality? Good vinyl?

Seem to be good. Customer service was outstanding (my address was wrong in eBay, & they just wanted to help). Seller was aj1423.

 

[JCC]

Swapped on a Rubicon takeoff steel bumper and mounted the winch I had on my JK. Also swapped on some Rubicon takeoff rock sliders. Then installed the Access tonneau cover.

 

[ShadowsPapa]

Seem to be good. Customer service was outstanding (my address was wrong in eBay, & they just wanted to help). Seller was aj1423.

Thanks, been thinking of something like that on my Overland (I can hear my wife now "WHY??") and I like the style you got.

 

[ospreyfe55]

Potted both my Front & Rear Axle Lock sensors! Much needed prevention to keep the lockers from failing! This should be something FCA should take care of from the factory!

 

[Troybilt]

Finally got around to making a bed stopper. I’ll add a few sliding dividers soon.

 

[DocMike]

Added some Molle Panels from @eight13design
Added my traction boards from my Prime Day purchases.
I'm not running a bed rack. I like naked Jeep too much. This will give me easy access to my traction boards even if the bed is full.

 

[Troybilt]

Potted both my Front & Rear Axle Lock sensors! Much needed prevention to keep the lockers from failing! This should be something FCA should take care of from the factory!

Ballsie move cotton. I believe mine just failed and the Zautomotive bypass did not help. Not sure what to do now.

Sponsored