What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[CLM]

DV8 Inner Fender Liners front and rear. Nicely made but difficult to install and supplied instructions are incomplete and not particularly helpful. A certain amount of bending brackets, relocating wires, and drilling holes is required. If you're OK with that, they're great. They fit and look great with stock factory Rubicon fenders. Again, you have to be willing to do a bit of cutting, bending, and drilling.

Sponsored

 

[Bbannongmu]

Installed the cab-side MOLLE panel from @BuiltRight … easy install. Then took it off to mount my X-Bull traction boards, as it’s way easier to mess with on the bench then vertical on the bed. Also mounted my fire extinguisher and my hatchet to the side MOLLE panels (not shown) … my axe is too beefy for my Quick Fist standard clamps so I have to order some long arms.

Nice! Been thinking of doing this. Looks cool. How is it working out for you?

 

[Bbannongmu]

Got my soft twill uppers on my Element half doors. Finally. … Video posted

 

[Gren71]

Got my soft twill uppers on my Element half doors. Finally. … Video posted

great video! I really was wanting these but ended up not after seeing too many poor reviews. Actually seeing them on a jt makes me want them WAY more now

 

[sandifer]

Loaded up the Kayaks !!!

 

[Bbannongmu]

great video! I really was wanting these but ended up not after seeing too many poor reviews. Actually seeing them on a jt makes me want them WAY more now

Too early to give a real review but you really do need to bend them to fit properly. And Velcro….lots of Velcro. I plan to run these all summer and see how they do. Thanks for watching!

 

[doc-ketamine]

Nice! Been thinking of doing this. Looks cool. How is it working out for you?

I'm very pleased with the fit and finish, and the strength, of the cargo rails in the MOLLE panels. It's awesome having the ability to put tie-downs and bungees anywhere I want, plus having my extinguisher and axes, etc, mounted out of the way.

 

[Bbannongmu]

I'm very pleased with the fit and finish, and the strength, of the cargo rails in the MOLLE panels. It's awesome having the ability to put tie-downs and bungees anywhere I want, plus having my extinguisher and axes, etc, mounted out of the way.

Cool. On my list. Any forum discount or hook up ?

 

[doc-ketamine]

Cool. On my list. Any forum discount or hook up ?

I think they do sales every once in a while but AFAIK there's nothing active at the moment.

 

[jnack]

Installed the ARB twin air compressor on my diesel Rubicon. Decent kit, easy to install but the main harness to the batter was a pain.

any tips for wiring main harness to battery? I'm going to be doing the same install on my rubicon diesel this week as well

 

[Foxtail]

Installed Metalcloak 3.5

 

[Sarge502]

Installed Metalcloak 3.5

Those wheels though!! What are those? Although I'd like better in black, those are nice.

 

[Zach32]

@Jacki wasnt comfortable drilling through the firewall with the battery in place. I attempted to remove the battery and tray, that ended in failure. You have to remove the PCM and fuse box and it's still a nightmare. So I ended up dropping the harness down the corner of the engine bay along the frame in the drain plug. Then go straight back under the seat, you cant go to the trim along the edge then under the seat the harness isnt long enough. I also used the aux switch 4 from under the dash. Unbolting the entire seat makes all of this easier. I kept the harness under the carpet and cut a small hole to feed it out once it got under the seat.

 

[Foxtail]

Those wheels though!! What are those? Although I'd like better in black, those are nice.

Everyone seems to do black wheels, I wanted something different.
Black Rhino Primm

 

[Evilmunky]

Took an off-road driving class with Overland Experts in Virginia.

Sponsored