What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[dloon]

Voswitch installed. Took a good bit longer than it should have, most of the time was spent trying to cram into tiny spaces under the dash. They do NOT give you a lot of room to work under there... Super easy installation other than that. A-pillar mounts and Rigid pods going on later.

Sponsored

 

[Casique]

Added semi-custom sheep skin seat covers to the front from AutoHQ. Kind of expensive, but they feel and fit great!

https://autohq.com/p-8-superlamb-semi-custom-sheepskin-seat-covers.aspx

 

[Volksparts]

Voswitch installed. Took a good bit longer than it should have, most of the time was spent trying to cram into tiny spaces under the dash. They do NOT give you a lot of room to work under there... Super easy installation other than that. A-pillar mounts and Rigid pods going on later.

Hey was there a small gap at the bottom of the switch panel on yours? I have a tiny Gap so I'm trying to figure out how I'm going to remedy that.

edit:. Never mind, I ended up just sanding around the edges to get it to fit better.

 

[Jeepin' John]

Added semi-custom sheep skin seat covers to the front from AutoHQ. Kind of expensive, but they feel and fit great!

https://autohq.com/p-8-superlamb-semi-custom-sheepskin-seat-covers.aspx

.

 

[Volksparts]

Followed suit with @dloon and installed my Voswitch setup. Ended up going strait to the battery for the power source since I like to turn on my lights out in the desert without the truck running. Only issue was that the power wire was about 8 inches too short with where I wanted my fuse block so had to extend the wire. Used to be a stereo and alarms installer for years so the install was right up my alley and one of the most simple and clean setups I've encountered. Also wired up my cowl lights to one of the switches and dang they are sooo friggin bright.

 

[FloridaJT6MT]

Added semi-custom sheep skin seat covers to the front from AutoHQ. Kind of expensive, but they feel and fit great!

https://autohq.com/p-8-superlamb-semi-custom-sheepskin-seat-covers.aspx

.

 

[Lucky1]

I agree. I realized the fenders didn't need pulling until after I was done and was pulling back the liner. Besides, in the install video they pulled the fenders with force and broke clips. I learned to pull back the fender liner and pop the clips from behind. Funny how many people can have different solutions to the same problem.
The oracle fogs and headlights with these morimoto are a great combo of all dark looking. I just got everything buttoned up this past week. Looks awesome.

Will those work on the Max tow flares?

 

[sass JT]

 

[Volksparts]

Will those work on the Max tow flares?

Don't quote me on it but I thought Max tow flares were similar to both Rubicon and Mojave. I have a Rubicon. In the product description it says fits all models except sport models. I bought mine through extreme terrain using the veteran discount along with the smoked side markers. Other sites were also out of stock so I received these in less than a week. When I called in they also said they have the clear housing version too.

https://www.extremeterrain.com/morimoto-jeep-wrangler-gen2-xb-led-turn-signals-smoked-lf513.html

 

[Jwarrenod]

Put this on the 2021 Willy's the other day. Love the flat color graphics.....

 

[NateSamJT20]

Got the rockhard4x4 plate & bar plus the winch installed the other day. Now for the next step:

- Teraflex 3.5” max travel
- Falcon 3.3s
- Clayton Arms, brake lines, track bars

Waiting for the RSE steps but got plenty to keep busy

Got everything installed over the last week. 4 kids under 5 has really kept me too busy from completing anything in a quick fashion. Artec inner fenders were a pain plus I was having all kinds of issues with things. Seemed like nothing would go easy but at least it’s all in. Have alittle bow in the rear springs and front axle is looking pretty good but could use some dialing in. Might take it to a shop and have them do it just cause I’m too busy.

 

[Tank Concrete]

Makes you wish you put a little bit more armor underneath

Where would you add armor? That doesn't look like fun and I'd like to avoid it!

 

[Tank Concrete]

There’s bag hooks on the back of the front seats.

I bought a set of these hooks, and I love them?
https://www.amazon.com/gp/product/B08HQYT9MP/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1

It's a four pack and each one snaps on to the headrest of the front seats from the back.

 

[Hootbro]

Got everything installed over the last week. 4 kids under 5 has really kept me too busy from completing anything in a quick fashion. Artec inner fenders were a pain plus I was having all kinds of issues with things. Seemed like nothing would go easy but at least it’s all in. Have alittle bow in the rear springs and front axle is looking pretty good but could use some dialing in. Might take it to a shop and have them do it just cause I’m too busy.

What is the story on the battery disconnect and mount? I would be interested in finding a similar setup.

 

[jkk58]

• N-Fab Podium rails/steps
• Rear right side tow hook to make things symmetrical

How have you liked the podium steps? They look great!

Sponsored