What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[The White Rabbit]

Installed a set of MOPAR XTREME!!! Recon fender flare extenders on my Sport S.

https://www.allmoparparts.com/sku/jlreconflareext.html

To get these to fit, I had to drill 8 holes in each the fender trim and some bending to get these pop riveted.

If you need to get rig legal cuz your tires stick out a little, these may be a good option for Sport S and Rubicon owners.

How far does it extend the fender?

Sponsored

 

[Nacho1103]

?? Installed mine last Saturday. Works like a champ…though…I still have baby tires…?

I didn't do Coverking headliner but I did do the Mopar headliner without any Kilmat or Dynamat and my factory Alpine stereo sounds 100% better and the interior is much quieter traveling down the interstate. Makes me wonder how much better it may have been had I used the Kilmat. But honestly, I am quite pleased as is.

I’m waiting for my gladilator still but I have the coverking, killmat and dynamat. I plan on doing dynamat in the areas that are the deepest, then roll on the killmat then coverking. My goal is to have it the roof completely flat. We’ll see how it goes

 

[doc-ketamine]

Installed one of two Metalcloak front inner fender liners. I had busted some plastic in the stock fender liners when I did some other work so I decided to upgrade.

 

[Whiskerbiscuit]

Installed a 67d mount. I chose this one because I can charge and sync the hiking GPS, mount my hand GMRS or HAM radio, and my cell phone. The cell mount is on the right. I adapted a quadlock to the 67d mount. I like it. I also chose this one because for every day use I can pull the mount balls off and looks nearly stock.

 

[ChillxPoint]

Thx to a forum member here i bought and installed this hood latch.

 

[Barnaby’sdad]

First ding. That panel is apparently about as thick as a beer can (accidentally tapped it with one of the freedom top panels).

 

[Cavitt]

Installed a set of MOPAR XTREME!!! Recon fender flare extenders on my Sport S.

https://www.allmoparparts.com/sku/jlreconflareext.html

To get these to fit, I had to drill 8 holes in each the fender trim and some bending to get these pop riveted.

If you need to get rig legal cuz your tires stick out a little, these may be a good option for Sport S and Rubicon owners.

Looks great! I ordered mine last night and got the "There is a back order of the part . We do not have an estimated date of when the part will be available. " message. How long did it take to get yours?

 

[Hud]

Wow, crazy it worked out ok. That kinda poke doesn't sound that bad. If you have a pic, that'd be really helpful
Thanks!

 

[XraytecH]

Looks great! I ordered mine last night and got the "There is a back order of the part . We do not have an estimated date of when the part will be available. " message. How long did it take to get yours?

Not very long less than a week?

 

[Cavitt]

Not very long less than a week?

That's great news! Last time I got the Mopar Backorder notification it took 6 months to get my proximity keyless door kit. Thanks for posting this, I didn't think you could get them at all.

 

[fireflip34]

the PI. Nicely done

Represent, I love this where did you get this done at? I need this

 

[j.o.y.ride]

Adjusted the rear axle angle to try and center the springs a little better.

 

[336mike]

Nothing fancy but got tired of crawling under the jeep to put in my hitch extender for my bike carrier so I relocated my tag to the spare tire. Now I can keep that extender in.

 

[the_visiting_fireman]

Nice! That's not nearly as bad as I was thinking. Thanks!

 

[Sespe]

I got fed up with the "quicker" disconnects.
Out with the old:

And in with the new:

Sponsored