What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[nickd]

Added pixel decals 2 layer fender vent decals!!

Sponsored

 

[montechie]

Added a Garfield to my back window

Trying to get our cat used to the Gladiator so he can camp with us.

 

[RufusMalloy]

Would you mind sharing a picture from top of the winch/bumper setup. I have the same and the wire from the winch is pushing up against the grill.

 

[Wordsworth]

Mopar Aux Switch bank installed! Took the kid and I about 5 hours to complete. JSCAN for the ECU stuff.

 

[kevman65]

Would you mind sharing a picture from top of the winch/bumper setup. I have the same and the wire from the winch is pushing up against the grill.

Do a search, there are a couple of threads talking about and showing how to relocate the cable that goes out the back to go out the same side as the other cable. Gets it off the grill.

 

[IanNubbit]

Pulled the harness in the door (1 today, the rest tomorrow, I’ll do a write up just because) to swap to just paracord door straps. I’m a sport so I can deal without having the lights turn on with the doors, because that’s all I’m loosing lol. But found some interesting wire routing… like out of all the places? This is where it’s designed to go

 

[chrismeece74]

Got it muddy out riding trails.

 

[jebiruph]

Pulled the harness in the door (1 today, the rest tomorrow, I’ll do a write up just because) to swap to just paracord door straps. I’m a sport so I can deal without having the lights turn on with the doors, because that’s all I’m loosing lol. But found some interesting wire routing… like out of all the places? This is where it’s designed to go

It looks to me like the cable was intended to be looped over the window crank.

 

[Ar4130]

I really don't like the media bay door. So I figured this helps my OCD a little.

Before

After

Why not just use the one in the center console? I never use the one in the pic

 

[Summitsearcher]

New QuadraTec Bumper on today. I’ll see how I feel tomorrow for the winch. Kicked this old guys butt!

 

[IanNubbit]

It looks to me like the cable was intended to be looped over the window crank.

Yeah, and how did that think that was a good idea in any way lol. Let’s just have wired rub against a rotating crank??‍

 

[Summitsearcher]

Added pixel decals 2 layer fender vent decals!!

He does great work!

 

[captain kilroy]

Ok , I am about to mount my arb twin under the passenger seat. I have an idea on how I want to wire it. I am running a solenoid to power my winch. I am thinking about running all the hot wires for the compressor to that same solenoid so that when the winch is powered up so will the compressor, but the compressor will still be on the included switch so it wont be on unless the winch switch is on. But this way the heavy wiring wont be hot all the time. Does anyone see a problem with this that i am not seeing? Any input would be greatly appreciated. Thanks

 

[Whiskerbiscuit]

Why not just use the one in the center console? I never use the one in the pic

Originally I did... but where I love my cell gets really bad reception so I have it mounted on the dash. The cord across the console bothers me.

It's my bed I have to sleep in it. My father used to say that to me when I chose to do things against the grain.

 

[Yona]

Added some side armor went from the side steps to the performance rock rails

Sponsored