Lunentucker
Well-Known Member
- Thread starter
- #1
Just posting FYI.
Sponsored
Shocks, lift, and on board compressor.$7,000 system.
Control arms, sway bar discos, air tank on a skid, controls, control pad, wiring.Shocks, lift, and on board compressor.
I believe at full lift it achieves 5.5 inches, but would be a very very stiff ride. The 3.5 inches and 1.5 inches are presets. Third preset can be set by customer and anything in between the presets can be achieved with the individual buttons.If it went from slammed to 5" lift I could see it as a cool option but only 3.5" ? not a chance,
Great! What shocks? Not likely anything of the quality compared to what you would get with 7k to budget.Shocks, lift, and on board compressor.
JRI shocks, think F1 and NASCAR, verbal commitment from ACCUAIR guy for a 100,000 miles on ACCUAIR airbag assembly.Great! What shocks? Not likely anything of the quality compared to what you would get with 7k to budget.
Same goes for the compressor. 2.2cfm is less than the basic single ARB.
what’s the life expectancy of an air system over steel springs?
7k is still a lot for what this buys you in both parts and convenience.
It does go from 0-5”, but it wouldn’t be very usable at either end of the scale. Everything that is ride height specific will be out of range. Shocks, track bars centering axles, sway bar link lengths, caster, etc.If it went from slammed to 5" lift I could see it as a cool option but only 3.5" ? not a chance,
How to say, "I didn't watch the video" without saying, "I didn't watch the video".Great! What shocks? Not likely anything of the quality compared to what you would get with 7k to budget.
Same goes for the compressor. 2.2cfm is less than the basic single ARB.
what’s the life expectancy of an air system over steel springs?
7k is still a lot for what this buys you in both parts and convenience.
If it gets you off of high center in the middle of nowhere or keeps water out of the cab then there's value.It does go from 0-5”, but it wouldn’t be very usable at either end of the scale. Everything that is ride height specific will be out of range. Shocks, track bars centering axles, sway bar link lengths, caster, etc.
The big height adjustments would be more for show and bragging rights. It’d be more useful for small height adjustments.