Bluetooth Noise Issue

[Great Offender]

Me too... I got mine ordered.... the ebay seller is probably going to wonder what the sudden interest is when he starts getting several orders ?
Get them before he raises prices .. ha ha

Did you get your order? I finally got around to placing an order last night and I was surprised how fast his inventory is diminishing.

Sponsored

 

[SargeDiesel]

Did you get your order? I finally got around to placing an order last night and I was surprised how fast his inventory is diminishing.

I actually received my order the next day after I placed the order... super lightning shipping. Everything was just as pictured/described.
I haven't installed yet, but see no reason there should be any issues.

 

[Great Offender]

Got a tracking number today and I should probably see it on Monday. Good to see he is legit.

Word must be out because this guy has gone thru over 100 since I first looked him up a few days ago. That's brisk business!

Edit: I received them in about 48 hrs and the product and packaging is identical to the photos you posted. Truck is in the shop for some warranty work so it will be a few days before I can install.

 

[SargeDiesel]

Got a tracking number today and I should probably see it on Monday. Good to see he is legit.

Word must be out because this guy has gone thru over 100 since I first looked him up a few days ago. That's brisk business!

Edit: I received them in about 48 hrs and the product and packaging is identical to the photos you posted. Truck is in the shop for some warranty work so it will be a few days before I can install.

Hey bud, did you ever receive your package ?
Did you compare them to my pics ?
Did you get around to installing them ?

 

[Great Offender]

Packaged identically I did receive them in about 48 hours. His site showed they were moving fast..

I went as far as to pull off the tops and pull back the entire trim piece and it seemed to be wedged at the sides. I was going to go further but was called into service by my wife. It spent the next week at the dealer getting some warranty work done.
Neighbors already think I'm nuts because I spend so much time out there working on the truck.

Short answer to #3 is No, I have not gotten to installing them yet so I'll ask:

Did you remove the entire trim piece with the microphones installed?
If you did take it down, how many connectors?

 

[Brojave22]

I actually received my order the next day after I placed the order... super lightning shipping. Everything was just as pictured/described.
I haven't installed yet, but see no reason there should be any issues.

are these plug and play or do you have to cut them?

 

[Lost1wing]

I had to cut and splice. You will also have to secure it in place with adhesive or tape. I taped mine in.​

​

For me, it made it usable but far from perfect.​

 

[SargeDiesel]

are these plug and play or do you have to cut them?

Splice

 

[Pisgahlj]

Had the same issue with my 23 Gladiator sport. They don't sit flush with the mic opening without breaking off the original mic holding tabs. I didn't want to break those so I just positioned them over the holes and taped them down. For Wiring I cut the pins on the the old mics at the wire junction then inserted that into the new mic pins that were removed from the junction block. Then Soldered those together and just pushed the pins into the vehicle wiring harness and taped them. Seems to be working well and 100% able to revert back if Jeep fixes these. I was unable to get the old mic side harness to accept the married pins after solder. After drilling enough hole, the pins were touching each other so manual insertion and electrical tape did the trick.

 

[biplaneguy]

Old thread I know, I finally got around to installing the mikes I bought last year. Installation was pretty easy (spliced the wires, broke off the tabs, and taped the mikes in) and my wife reports it sounds much clearer... thanks @Sleighman!

Sponsored