Cable routing

[NonHyphenated American]

I have watched a bunch of videos of putting down the windshield and routing wires into the cab but can't see exactly where the wires are run. I see there are two foam pieces that come together when the windshield closes. Does anyone have a good still of exactly where a wire needs to be ran so I don't get wind noise or rain intrusion?

Sponsored

 

[Mr._Bill]

If you have an automatic transmission, the best place to bring wires through is the plug in the firewall hole normally used by the clutch.

 

[NonHyphenated American]

If you have an automatic transmission, the best place to bring wires through is the plug in the firewall hole normally used by the clutch.

That's where I have everything going through right now. I want to get my GMRS and CB antenna cable away from power wires.

 

[Freems]

This should help if you stay with the clutch hole. Make sure you ground the shielding cable.

 

[Sandevino]

Take the cowl covers off and you’ve got easy access under the windshield

 

[Free2roam]

Take the cowl covers off and you’ve got easy access under the windshield

Yup exactly how I ran mine. Then up the pillar and across the trim can't even see it except where it pokes out

Sponsored