Gladiators on Mopar 2" Lift Kit

[Sorbs]

Stock LE wheels and tires with 2.5" Mopar lift

Sponsored

 

[SKT]

Owner: @TennesseePA

From: https://www.jeepgladiatorforum.com/...ed-gladiator-jt-club.8497/page-19#post-272743

 

[TTEChris]

Can someone with a hardtop, 37's and this lift measure how tall it is? I'm trying to figure out how much clearance I will have in my garage.

My JL with 40s and 4-5" lift fits without issue with a hardtop, but with the factory softop I would lightly graze on hot days.

Thanks in advance

 

[oneal_cj]

Can someone with a hardtop, 37's and this lift measure how tall it is? I'm trying to figure out how much clearance I will have in my garage.

My JL with 40s and 4-5" lift fits without issue with a hardtop, but with the factory softop I would lightly graze on hot days.

Thanks in advance

Approx. 78" tall

 

[TTEChris]

Approx. 78" tall

Thanks, I really appreciate it!

Are people finding the Mopar lift gives more than the advertised lift height similar to the JL's?
On a JL Rubicon the Mopar kit would give 3+" depending on your factory options.

 

[Lindacamp941]

NICE! I would have liked to see it with 17" wheels though, but beggars can't be choosers.

So this might be a silly question, but here goes: When adding the Mopar 2" did you need a level kit as well? Also, does it void the truck warranty by adding the lift?

 

[Trauma PA]

So this might be a silly question, but here goes: When adding the Mopar 2" did you need a level kit as well? Also, does it void the truck warranty by adding the lift?

You do not need a level kit.
For those that don't plan on towing or mount a heavy off Road front bumper and winch, a spring spacer can be applied on each side in the front.
The Mopar lift, or any lift for that matter, will NOT void your warranty. Consumers are protected by the Magnuson-Moss Warranty Act.

 

[Renegade]

Approx. 78" tall

What's the margin of error on this measurement? I thought that Jeep listed the overall height of the Rubicon at 76.1". This would mean a 2" radius increase in tire size and 2" increase in suspension height is only netting 2" of overall height increase somehow. I would love it if this is somehow the case (or if Jeep is falsely advertising the overall height by 2"). This would mean that what I want to do to mine when it arrives will fit in my garage, at 80"...

 

[oneal_cj]

Margin of error is based upon the tape measure I was using.
Tires were inflated to 40PSI (Max) when measured.
Photo was taken as I was measuring due to my wife saying it would not fit in the garage (it did with 4 inches to spare)

 

[steffen707]

Margin of error is based upon the tape measure I was using.
Tires were inflated to 40PSI (Max) when measured.
Photo was taken as I was measuring due to my wife saying it would not fit in the garage (it did with 4 inches to spare)

Margin of error is based upon the tape measure I was using.
Tires were inflated to 40PSI (Max) when measured.
Photo was taken as I was measuring due to my wife saying it would not fit in the garage (it did with 4 inches to spare)

If it fits, measure garage door opening. Then park under door opening, measure from roof to top of opening. Super accurate.

 

[Renegade]

Margin of error is based upon the tape measure I was using.
Tires were inflated to 40PSI (Max) when measured.
Photo was taken as I was measuring due to my wife saying it would not fit in the garage (it did with 4 inches to spare)

Perfect- thanks!

 

[msujedi]

Photo was taken as I was measuring due to my wife saying it would not fit in the garage (it did with 4 inches to spare)

So, you're sayin' that you're going up to a 4" lift and 40s soon? ... you'll still have half of an inch to spare!

 

[SKT]

 

[msujedi]

What are the dimensions of the crate that the Mopar lift kit comes in?

 

[steffen707]

What are the dimensions of the crate that the Mopar lift kit comes in?

23.75x23.75x29.25"tall

Sponsored