Got it on the road with old school wrap, 3.5" lift and 37s. All I lack is finishing

[Sandman 4x4]

Love these retro wraps. Jeep looks great.

Seeing both in pictures you can see the different “tweak” the designer made. Not that it looks bad, because it does not. But if my truck I would have told them to leave the black accent stripe as is, bordering the bottom, higher up, with the extension panel added behind the fender all in the same line.

Sponsored

 

[NC_Overland]

I like how yours came out, I was curious on how my sarge green glad would look so this is what gptchat came up with. I think yours looks better in red.

That looks incredible

 

[Jmag92]

Picked up my 20 le a couple of months ago. Got the old school wrap, finished the Metalcloak 3.5" lift and 37s today. Still have skid plates, gears, shell plus whatever I come up with.

Picked up my 20 le a couple of months ago. Got the old school wrap, finished the Metalcloak 3.5" lift and 37s today. Still have skid plates, gears, shell plus whatever I come up with.

 

[CC_Willys]

Picked up my 20 le a couple of months ago. Got the old school wrap, finished the Metalcloak 3.5" lift and 37s today. Still have skid plates, gears, shell plus whatever I come up with.

Hot damn that is one good looking Jeep.

 

[Bandit’s Lair]

This is SICK!!!!!!

 

[DanJT]

Love the wraps and the historical look!

You guys make me miss my CJ8 Scrambler. It was the tan with stock similar design.

Missing my scrambler led me to get a Gladiator. Not sure the better half would let me add similar decals to "our" Snazberry1.

I bet the red would look killer with your Snazberry! Just saying...

 

[JeepOfTheseus]

The way it sits looks great. Are you using any spacers or just what comes with the MetalCloak 3.5” springs?

 

[3TDJEEP]

Good looking JT. I'd lift it a little more in the rear.

 

[Ssober]

It has 3.5 springs on the front 4.5" springs on the rear. It's actually uphill toward the front that may be why it looks like that. I do have a bedslide and some packouts.

 

[JeepOfTheseus]

It has 3.5 springs on the front 4.5" springs on the rear. It's actually uphill toward the front that may be why it looks like that. I do have a bedslide and some packouts.

Pretty level for 1” higher in the rear. I’m running 3” AEV HD springs, but even with a retractable hard cover and 150lb RTT, it’s pretty raked. Been contemplating switching to something else like the 3.5” MetalCloaks.

 

[Honcho.Jeep.JTR]

I completely agree
Love the Honcho vintage graphic on my Gladiator as well.
Glad to see another firecracker red with it

 

[Bandit’s Lair]

Luis, which roof rack is that and is it level all the way from bed cap to the hardtop?

 

[Honcho.Jeep.JTR]

Luis, which roof rack is that and is it level all the way from bed cap to the hardtop?

Both racks are from @rival4x4
The one on top of the hardtop is half rack and the one on top of the canopy camper is full rack
The full rack it’s slightly off from the half one

 

[MPMB]

Need new hood stickers that say "Mike Honcho" on there.



If anyone doesn't know the reference:

Talladega Nights

 

[Bandit’s Lair]

Both racks are from @rival4x4
The one on top of the hardtop is half rack and the one on top of the canopy camper is full rack
The full rack it’s slightly off from the half one

Ok Maybe the half rack is what I’m looking for then. Eventually going to do some sort of light bar but do not want it at the windshield. BTDT and never again. Too much light right close to the face. I lost depth perception pretty badly. Maybe it was the throw that did it but I don’t want to tempt fate again. lol

Sponsored