What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Jeepmonster]

the tech doesn’t decide if you need it or not. The TSB states - if the customer indicates he has wander or pull (as you indicate you do), that they are to replace the steering gear and flash he EHPS system. Insist on the replacement. Don’t settle for just an alignment.
Read the TSB thread for more info.

You're correct. According to the TSB, they are to perform the procedure "If the customer describes the symptom/condition listed above". I'll continue insisting. Thanks.

Sponsored

 

[Proximo]

Did some 37’s... fairly tight up front..

37's no lift?

 

[CTFriel]

37's no lift?

1.5” up front with 1” bumpstops. Waiting on the rear spacers. Going to add longer upper bumpstops and see how it does

 

[Jeeperjamie]

Added some led bulbs for the taillights and reverse lights. 3157.is what the stock ones are but the Sylvania Zevo 3157r would not fit. I ended to taking a chance on the zevo 7443r and they fit. Used the Sylvania led 921 for the reverse lights and wow what a difference.

You want have any trouble seeing to back up with these installed and the brake light, they will definitely see you braking. I'm happy.

 

[Jim smith]

Man I like that set up. Can you give me the dimensions?

Give a day our two

 

[mx5red]

I know this has been posted on here but this needs to be on every one of those “Ten Cheap Jeep Items Every Jeep Owner Needs!” lists.

So much faster than trying to play with the crappy little wrench in the tool kit. Start bolts by hand and then, “bbbbbzipp.” Done. (Watch the torque flipping the attachment over when you are around paint and the bolt stops moving) $25 well spent.

Can you tell me where that bit is from? Fits that attachment perfectly, low profile...

 

[Gatorac]

What size tires? And did you put a lift on?

33x12.50x17 Ridge Grapplers. 17x9 ET-12 Fuel Sledge. Max Tow. No lift.

 

[Len]

Dec 11 - Dec 12. Advised the ANA/AAF QRF at KAIA. That plate came off one of our soft skin TLCs...

I was on camp Phoenix, doing personnel protection to a 3 star in charge of all the detention facilities. Staff safe brother!

 

[Proximo]

1.5” up front with 1” bumpstops. Waiting on the rear spacers. Going to add longer upper bumpstops and see how it does

Nice rig there. I have 20k miles on my 35's and I'm pretty sure 37's are next when this meat is gone.

 

[Kinz384]

Put covers on. Not 100% finished. Still need go through & adjust & smooth out. Plus waiting on headrest to get finished. Logo is being stitched on.
but got em on to get an Idea Of how going to look.

 

[Gren71]

I love the idea if the in bed swing out boxes but just couldn’t level with drilling one into my bed. So i went another route. Found a box on ebay for $85 and got $15 worth of parts from lowes. Now i have a box that fits perfectly and attaches nicely to my trail tails!

 

[Gladiator Joe]

Just a wash. Got a late start and had to get creative to keep out of the sun.

 

[Bkinnell]

Picked it up from Ceramic coat

Hey,
Jeep looks great! I was debating getting this done to mine. Is it just the camera/light/ angle that has the fenders look a different? Or is it just me

 

[GreenMan]

Installed the Bakflip Revolver X4. Looks good and fit is nice and snug. Instructions could be improved as it doesn’t tell you which bolt/washer goes where.

 

[Bbannongmu]

Hey,
Jeep looks great! I was debating getting this done to mine. Is it just the camera/light/ angle that has the fenders look a different? Or is it just me

I love the ceramic coat. Makes it easier to keep clean. The fenders have a Kenzo protectant on them but they’re Factory fenders with Rubicon hi line fender flares. It was a mirror finish. Not sure video does it justice.

Sponsored