HELP NEEDED URGENT

[Chuckfu5]

Hey fellow jeepers......I'm trying to locate parts needed to put a supercharged engine back to stock.....does anyone have a "kit" of parts laying around?

Intake, heater hoses, serpentine belt, injectors and anything else I may be missing? I'll pay for shipping and a reasonable fee.

I'll also have a Magnusons TVS1900 for sale here at a reasonable price shortly.

@DAVECS2

Sponsored

 

[JTdiRtyD]

@Flyin6 is installing a SC soon

 

[NC_Overland]

Damn. With that all caps heading I thought you were stranded in the desert or something.

 

[DylanM]

Damn. With that all caps heading I thought you were stranded in the desert or something.

Worse. During the initial SC install his wife asked if it'd be best to hang onto all those stock parts just in case, at which he scoffed and dramatically flung them in the garbage. Now he must acquire the parts posthaste lest he incur a severe dose of "I told you so".

 

[gonemad]

Damn. With that all caps heading I thought you were stranded in the desert or something.

Seriously.

 

[rughboy]

You my friend are in good fortune! For yes I do happen to have all of the stock components to fit A 3.6 Pentastar V6 engine, mine is from a 2020 year model. If you are still in the hunt for one let me know and I can get you pictures if you wish. I cannot send them at present but shout be able to send them later today or tomorrow!

 

[Sandman 4x4]

Hey fellow jeepers......I'm trying to locate parts needed to put a supercharged engine back to stock.....does anyone have a "kit" of parts laying around?

Intake, heater hoses, serpentine belt, injectors and anything else I may be missing? I'll pay for shipping and a reasonable fee.

I'll also have a Magnusons TVS1900 for sale here at a reasonable price shortly.

@DAVECS2

Why are you removing the SC kit?

 

[Chuckfu5]

You my friend are in good fortune! For yes I do happen to have all of the stock components to fit A 3.6 Pentastar V6 engine, mine is from a 2020 year model. If you are still in the hunt for one let me know and I can get you pictures if you wish. I cannot send them at present but shout be able to send them later today or tomorrow!

Thank you.

The dealer requested all parts be purchased new to cover the engine under warranty.

LAME

 

[Chuckfu5]

Why are you removing the SC kit?

Dave believe's I had a top end failure which resulted in a catastrophic failure of one of the cylinders blowing oil through the PCV valve and damaging one of the cylinders resulting in pretty signficant blowby.

Dealer was able to get it warrantied but I decided it wasn't worth going through everything again and thought I'd keep my new 3 year 100,000 MOPAR warranty on my new engine.

Needless to say I have a TVS1900 Magnuson kit with about 40,000 miles on it available. Make me an offer....

 

[MPMB]

Sorry. Nothing that would help. Just a worn intake camshaft and rockers. But I'm keeping that to mount as a trophy.

 

[ALT2870]

Thank you. The dealer requested all parts be purchased new to cover the engine under warranty. LAME

Honestly they are doing you a solid. You made a pretty major modification to the engine which most dealers would of denied and probably would of blacklisted you for any dealer. I'd take your losses and run, good to see they got your back.

 

[ShadowsPapa]

@Flyin6 is installing a SC soon

And if I was him, I'd keep all of the take-offs for a long while.............. or else face posting a help needed urgent post in his future.

 

[DAVECS2]

I have an arsenal of safeties, which worked but I believe the 3.6 still managed to crack a ring land when the compression went up due to a valve not being open when it was suppose to be. Engine still runs and all but it has blow by. I had been working with Charles and I had a suspicion from the data that something was off on one of his cylinders. He did everything right but was using the truck as a truck and it broke.

 

[Smash615]

Dave believe's I had a top end failure which resulted in a catastrophic failure of one of the cylinders blowing oil through the PCV valve and damaging one of the cylinders resulting in pretty signficant blowby.

Dealer was able to get it warrantied but I decided it wasn't worth going through everything again and thought I'd keep my new 3 year 100,000 MOPAR warranty on my new engine.

Needless to say I have a TVS1900 Magnuson kit with about 40,000 miles on it available. Make me an offer....

Holy smokes man. That freaking SUCKS. I've been dreaming of adding one someday. Now I'm not interested with only 37K on my engine. Thanks for the warning!

 

[Chuckfu5]

Sponsored