How to disassemble the D44 M210 Non Rubicon Sport Brakes, Hubs, Axles, FAD, shafts, Differential, Pinion, Yoke

[Brfertig [HACKED ACCOUNT]]

This video is to show you how to dismantle the axle. This is not too tough, just a lot of time and keeping track of parts.

:00 Intro
:52 Remoe Wheels and Tires
1:15 Remove Driver Side Brakes
1:30 Remove Driver Hubs 35mm Socket (not 36)
2:00 Remove Driver Axle Shafts 2:15 Remvoe Passenger Axle Nut 35mm Socket
2:45 Remove Passenger Brakes
3:00 Remove Passenger Hub
3:45 Remove Passenger Axle Shafts
4:00 Remove Differential Cover
4:30 Remove Diff Caps
5:00 Make note of of diff caps placement
5:45 Differential Bearing Changes in the Advantek M210
6:30 How to Remove Front Axle Disconnet FAD
7:30 How to remove the FAD Shaft C Clip
8:30 Remove FAD axle shaft 9:15 Diff Removal
9:40 Remove Driveshaft Yoke 10:00 Check Pinion Play in Inch Lbs 30-35 inch pounds
12:30 Remove Pinion Nut 32mm 13:00 Remove Pinion Flange
13:30 Remove Pinion 14:00 Remove Pinion Seal
14:45 Remove Pinion Race with Brass Punch
15:30 Outro and Info on the upcoming ARB and Gear install

Sponsored