Edub
Well-Known Member
- Thread starter
- #1
First, I am aware there are cheaper ways of doing this. Not to mention, through trial and error, I absolutely spent more then I needed. But below is the list of the parts I actually used and I am very happy with the results. I added a Milton valve so it can be used at any gas station air pump if needed. the total for this set up was right around $200.
- Amazon.com: Haltec H-5265 Standard Bore Lock On Air Chuck (5 Pack): Automotive (be careful if you pick another model, not all close after being disconnected and you will lose all pressure. [ask me how I know])
- Amazon.com: Flexzilla Pro Air Hose, 3/8 in. x 50 ft, Heavy Duty, Lightweight, Hybrid, ZillaGreen - HFZP3850YW2: Automotive
- Hromee 3-Way Air Manifold 4 Ports Aluminum Industrial Flat Hex Quick Connect Air Hose Splitter with 3 Steel Couplers and 1/4" Male NPT Plug - - Amazon.com
- Litorange 2 PCS Metals Brass Pipe Fitting 90 Degree Barstock Street Elbow 1/4" NPT Male Pipe x 1/4" NPT Female Pipe - - Amazon.com
- Amazon.com: Flexzilla Pro Air Hose Reusable Fitting, 3/8 in. - RP900375: Automotive (I used a total of six of these but the flex hose already comes with two)
- Bitray 1/4" Heavy Duty Brass Ball Valve Shut Off Switch, 1/4 Inch Male and Female NPT Thread Pipe Fitting, Air Compressor Brass Valve Female Male Shut Off: Amazon.com: Industrial & Scientific (this actually came with two so perhaps you can find a singe for less)
- Amazon.com: Da by 2 pcs 3/8"(10mm) Brass Tee Barb Fittings for 3/8" ID Hose,6 pcs Stainless Steel Pipe Clamps,3 Way Union Intersection for Water/Fuel/Air(T): Home Improvement
- Measureman 2-1/2" Dial Size, Liquid Filled Pressure Gauge, 0-60psi/400kpa, 304 Stainless Steel Case, 1/4"NPT Back Mount: Amazon.com: Industrial & Scientific (any gouge will do but be mindful of the PSI range and mounting location)
- Milton (S-684-4) 1/4" MNPT Male Tank Valve - Arc Welding Accessories - Amazon.com (this will allow you to use a standard gas station air-pump)
- Amazon.com: Gasher 12PCS Metals Brass Pipe Fitting, Hex Nipple Brass Tone, 1/4" x 1/4" NPT Male Thread Pipe, 1/4Inch x 1/4Inch NPT Female Thread Pipe: Home Improvement (all I needed from this kit was a simple 1/4" x 1/4" NPT Male Thread Pipe but I couldn't find one on its own)
- SUNGATOR 1/4" NPT Barstock Tee, 1/4" NPT Hose Barb Adapter, Hex Nipple 1/4" NPT Male x 1/4" NPT Male, Brass Pipe Fitting and Air Hose Fitings (6-Pack) - - Amazon.com (not everything in this kit was used, I just needed the "T" fitting.
Sponsored