Mopar Dash Accessory Rail for mounting phones, ect

[ShadowsPapa]

Yes that’s it. I’ll take a couple pics tomorrow. There is a channel cut out in the middle in addition to the holes I mentioned. I would say most 3rd party mounts would adapt to it.

Thanks!

Sponsored

 

[GladyRoxor]

 

[davesparky6]

Does anybody make one of these that also QI charges? Wireless CarPlay chews battery on trips….

 

[Y-Guy]

@davesparky6 check out the RAM mounts options, they make a 25watt mag safe adapter, and they have double socket arms too.

 

[Mad Mac]

Do any of these accessory panels
use M-LOK style slots
so accessories can be installed or adjusted
without having to remove the panel

 

[Mad Mac]

Specifically, what I was thinking of
was the BulletPoint RubiGrid style.
It looks like M-LOK but when I wrote them
they did not know what I was talking about.
You still have to take it apart
to add or change anything.

 

[Advntrbound]

I have the RAM mount. I like it but rarely use it. I don't like anything obstructing my vision. I just ordered the apex Crow overhead molle panel. It'll hold my campers rear view camera monitor.

 

[ShadowsPapa]

Got one ordered, will pick it up Tuesday when I'm there for the sunrider issue. BulletPoint and others make balls for these, and I can use my existing BulletPoint phone holder and maybe get a second to use for my snow plow control.
(and that song on your screen, instantly took me back!)

That mount will allow use of the space directly above the radio, too, and it sits back from the edge of the dash. Nice.

Now, when someone asks about wireless charging - why is the assumption the world runs on apple and the response is always apple products? There's still about 45% of us who won't run Apple.

 

[Y-Guy]

Now, when someone asks about wireless charging - why is the assumption the world runs on apple and the response is always apple products? There's still about 45% of us who won't run Apple.

Well, I've never used a Droid so I can't comment on their abilities or features, I share what I know and that's the Apple line up, figure somebody else can share Droid info.

 

[aqcjeepGlad]

I have the Bulletpoint picatinny style rail in my JT. It looks almost identical to the Mopar one I saw at Jeep Beach, the difference was the mounting holes/location for the ends on the newer dashes are wider than the 2021 JT I have. The rail works great very stable, easy to adjust and lots of room. I also looked at the RAM slide mount and the 67 Design slide rail. I liked the look of the picatinny style rail and the price was much better than 67 Design.

 

[ShadowsPapa]

I have the Bulletpoint picatinny style rail in my JT. It looks almost identical to the Mopar one I saw at Jeep Beach, the difference was the mounting holes/location for the ends on the newer dashes are wider than the 2021 JT I have. The rail works great very stable, easy to adjust and lots of room. I also looked at the RAM slide mount and the 67 Design slide rail. I liked the look of the picatinny style rail and the price was much better than 67 Design.

I'll be picking my MOPAR piece up tomorrow and will try to get it installed later tomorrow if they get done with my truck in time.

Part of the 24/25 dash is unusable due to the new shape up there.

 

[Jteakus]

My daughter got me a GoPro for Father's Day. I ordered the 67 Designs rail mount with driver phone mount, GoPro mount and a radar mount. Dallas is not far so hopefully will have it soon. Will post pics of the install.

 

[bill61]

Does anyone know if this Ram track ball base will work with the Mopar raised track for 2024 and newer?

https://rammount.com/products/rap-b-354u-tra1

 

[GladyRoxor]

The short answer is no but they could be made to work in a pinch. 1) use the short stud version 2) stud will have to insert bottom up 3) You will have to hold back up on the track portion to tighten the ball 4) you will see the chrome below the track.

 

[kbechtel]

Bulletpoint has a track system for their mounts.

https://www.bulletpointmountingsolu...ngler-jl-jlu-gladiator-jt-platform-dash-mount

I know the OP got his answer, but I second this, I went with this solution and haven't regretted it.

Sponsored