***Official Mojave Thread*** Lets talk Mojaves

[KurtP]

It’s the small things right? Just added these today. Now they look like my old JLUR wheels. I’m not sure why they don’t come like this.

those are bfg 35x12.5???

edit. Just zoomed in and yes they are. Im shocked because bfg’s usually run small and yet they look good even with your lift. Id expect them to look too small.

Sponsored

 

[NCLife]

those are bfg 35x12.5???

edit. Just zoomed in and yes they are. Im shocked because bfg’s usually run small and yet they look good even with your lift. Id expect them to look too small.

Lol...the post was about the orange Jeep Easter egg I added to the wheels. However, you aren't wrong. I was intentional about going with 35's for the ride quality and think they look fine. I know 37's would look better, no debate about that, but they look good enough I'm not regretting my decision. I had the same 35's on my JLUR, with a MOPAR lift. I moved to the 37" Nitto Ridge Grapplers. About 2 months in I regretted the move.

 

[Dewyaw]

They are 1.5” x .84”. I measured the ones on my JLUR before I sold it.

Did you get orange or burnt orange? I’ve always thought the Mojave sticker looks more burnt orange....

 

[Planerdude]

Any Mojave owners do any actual highway travel trailer towing in the 3000 pound range? If so what are impression of the Mojave for that?

I’ve towed my 16’ 2 axle utility trailer, loaded with cabinets, probably 3,500lbs total. No Problem. Stops great with No brakes on trailer.

 

[Planerdude]

Do you happen to know the offset on the stock Mojave wheels? I cannot find anything online. Also, have you found a front bumper that will work with the Falcon reservoir?

37mm

 

[NCLife]

Did you get orange or burnt orange? I’ve always thought the Mojave sticker looks more burnt orange....

Orange

 

[Jlmckinney]

*** 2020 JTM (Gobi) delivered August 2020. Build on-going ... really enjoy the Gladiator!

*** Complete:
- DiamondBack HD Tonneau Cover
- BesTop Sunrider (Twill)
- Mopar Trail Rail System; Door Guards; Grab Handles; All-Weather Floor Liners; Hitch Receiver Plug
- Front Runner SlimLine II Tray; Load Bed Legs; Tracks; LED Floor Light ... +Multiple Rack Accessories
- Thule AeroBlades
- K.C. HilLites Wire Hider (Multiple)
- RokBlokz Mud Flaps (XL)
- AEV Salta Wheels & ProCal Snap
- Quadratec Lug Set; Center Console Storage Tray; Flashlight Holder
- BFG MT KM3 x5 (35 x 10.50 x 17R)
- PixelDecals.com

*** Future:
- CMM A-Pillar Mount Solution
- AEV Snorkel; Front/Rear Bumpers; Fuel Caddy Solution
- ARB Compressor & Intensity LED Lighting
- Warn Winch (Zeon 10S) ... +Updated Recovery Gear
- Half or Tube Doors (Undecided on Manufacturer)

... appreciate the thread; great ideas, shares, and lessons learned. See you out on the trail!

- CHEERS -

----------
'20 JTM / '12 JKUR / '46 CJ2A

Are you setting on stock suspension

 

[Johnnyboy]

I sold the 19 JLUR for this. I moved a lot of parts over from the JLUR (bumper, winch, trackbar, adjustable lca’s, and lots of bits and pieces). Just installed the teraflex lift and went with 35’s in lieu of the 37’s like I had on my JLUR. Great truck so far and more practical for me than the Wrangler.

Love it! We have similar tastes. I even have the same door hangars lol. Do you have any pics further away? I want to get a better idea of what the 35’s look like. Its hard to tell close up. Thank you great looking Jeep!

 

[RYSlimVegas19]

Are you setting on stock suspension

Yes ... stock; no suspension components added. - CHEERS -

 

[NCLife]

Love it! We have similar tastes. I even have the same door hangars lol. Do you have any pics further away? I want to get a better idea of what the 35’s look like. Its hard to tell close up. Thank you great looking Jeep!

Love it! We have similar tastes. I even have the same door hangars lol. Do you have any pics further away? I want to get a better idea of what the 35’s look like. Its hard to tell close up. Thank you great looking Jeep!

here you go

 

[Jlmckinney]

here you go

Did you manage to use the Mojave skid plate or the one that goes with the steel bumper

 

[JfishKing]

Mounted the Teraflex "Mojave Special" 2.5" lift and NITTO 37" (37X13.50R17) Ridge Grapplers (emphasizing 13.50 as opposed to 12.50 for extra burly). So, total lift is approaching the 4" mark (not accounting for tire size) due to the Mojave rolling off the line about 1" higher than a Rubicon.

What cowl light brackets are u running.

 

[NCLife]

Did you manage to use the Mojave skid plate or the one that goes with the steel bumper

No I used the Mopar steel bumper one. The alignment with the Mojave one was kind of kluge and would of required some cutting to make work.

 

[brain]

What cowl light brackets are u running.

Generic RIGID.

 

[JfishKing]

Generic RIGID.

sorry brother can u share a link... not finding anything that looks like that... or a model number etc. and any other pictures of it

Sponsored