***Official Mojave Thread*** Lets talk Mojaves

[Cowboy JK]

So can the Mopar cowl light brackets work on a Mojave? They are in my cart but I may need to hold off or find a local set to test with.

I doubt it. I have ordered a set that just bolts to the top of the cowl. I will update once they come in

Sponsored

 

[GreenMan]

Breaking her in this weekend!

 

[MR GRANITE]

Just tried to put cowl light brackets on. Diode Dynamics They don’t fit. The cowl is different on a Mojave.

I tried moving my DIODE DYNAMICS brackets this morning from my 2019 JL Rubicon and ran into same problem. Shot an email off to them this morning.

 

[jbn40301]

Regarding the hood scoop mod-- 99% sure that's not going to cause any issues, but I'm also thinking that won't be helping. That area is precisely where many (race) cars position a vent rather than a scoop. There is a lot of high pressure air coming in through the radiator, and a vent in that position usually aids in the air flow, as it becomes a point of lower pressure.

Adding an additional source of high pressure air into the engine bay could disrupt the flow of air or create turbulence, potentially hurting actual performance.

Or, it could be a benefit. I'm not scientist, but I read a lot about venting before I got my genright louvers because I found it interesting.

What about water intake from rain?

 

[Bonanza]

What about water intake from rain?

The only item right there is the top of the intake plenum. Should be fine, based on the minimal amount that would get in there.

 

[Jaxmax]

The amount of rain coming in hood scoop would be less then what is coming through radiator. Under the hood is not a really dry place in the. rain.....jack

 

[jbn40301]

I love mine just picked it up last Saturday!

 

[Wizard5980]

I love mine just picked it up last Saturday!

Love the black with tan interior! After my last 3 jeeps having that color scheme, my wife said it was time for a change. So.... i went with Gobi and black interior! What can I say....I'm a creature of habit! Best of luck with the new rig!

 

[jeepfreakedc]

They are supposed to sit 1/2-1” higher in the front suspension, depending on which article you believe. I did the super accurate hand measurement between the top of the tire and fender and the Mojave was noticeably taller.

That hood scoop is HOT!!!

 

[Cowboy JK]

Aux switch 3 wired up.

 

[SloW8]

Aux switch 3 wired up.

Which brackets are these and did you have to modify them to fit the Mojave cowl?

 

[Cowboy JK]

Which brackets are these and did you have to modify them to fit the Mojave cowl?

Go Rhino. Only mod was 1” longer bolts. They have a different bracket if you want cube lights.

 

[Cowboy JK]

Go Rhino. Only mod was 1” longer bolts. They have a different bracket if you want cube lights.

If you use these brackets mount the lights on before you install them on your truck. The brackets have keepers that secure the lights and the tiny screws were a pain to get started.

 

[Cowboy JK]

If you use these brackets mount the lights on before you install them on your truck. The brackets have keepers that secure the lights and the tiny screws were a pain to get started.

 

[Scteal]

For those of you looking for Mopar cowling light mounts that will work on the Mojave, here you go:

https://www.mopargenuineparts.com/sku/82216213aa.html

Sponsored