Offset help.

[JT71]

I'm going to get some MR703's but for now just use the stock 33 Falken A/T's. The 703's are either zero or 25 offset and I know the factory wheels are 44. Will the 25 give the stock tires any poke?

Sponsored

 

[rob_o]

Your new wheels will poke approximately 3/4" inch outwards

it'll fill out your fenders better.

 

[JT71]

Your new wheels will poke approximately 3/4" inch outwards

it'll fill out your fenders better.

Thanks for reply. About how much poke for the zero offset?

 

[kaeo_15]

Another inch on top of that for the 0 offset. Here’s a good tool to visualize different setups.

https://www.willtheyfit.com/

 

[rob_o]

A little under 1 3/4"

Your tire would probably stick out about 3/4" past the fender but it would fill them out better than +25 it would be more "aggressive" looking.

 

[JT71]

A little under 1 3/4"

Your tire would probably stick out about 3/4" past the fender but it would fill them out better than +25 it would be more "aggressive" looking.

So 25 is probably best then now with the 33's cause when I do get the 35's it wont poke too far.

 

[j.o.y.ride]

So 25 is probably best then now with the 33's cause when I do get the 35's it wont poke too far.

Even 0 isn't going to be all that much poke on 35x12.5

 

[Sallaman]

I went with the 0 offset with the 285s and the tread pokes out about 1/2”. It will poke out even more when i upgrade to the 315s.. in my opinion, A little poke looks good but in hindsight I wish i would have gone with the +25, they would have been about perfect…

 

[JT71]

I went with the 0 offset with the 285s and the tread pokes out about 1/2”. It will poke out even more when i upgrade to the 315s.. in my opinion, A little poke looks good but in hindsight I wish i would have gone with the +25, they would have been about perfect…

Do you by chance have a picture of your wheels on the 33's?

 

[Sallaman]

Do you by chance have a picture of your wheels on the 33's?

 

[JT71]

Thanks! Looks good. With the 25 I wonder how much poke you would have, maybe just the sidewall?

 

[Sallaman]

Yeah, with +25 it would be perfect IMO, it would fill out the wheel wells without spilling over too much… and the 315s would prob just stick out as much as these do now but would be fine with the bigger tires… now i just have to save up for some new wheels

 

[Insert_Clever_Name_Here]

Thanks for reply. About how much poke for the zero offset?

I have zero offset but on a Rubicon. Just a little bit of poke.

Sponsored