Sponsored

Removal aux battery and menu

Renaton

Member
Joined
Apr 9, 2025
Threads
4
Messages
16
Reaction score
15
Location
Italy
Vehicle(s)
Gladiator '21 Overland
Hi!
This afternoon I have removed the aux battery. I have isolated the negative wire and removed the F42. Ten minutes of work.
After, I turned on the JT and it run ok.
But...on the central screen on board appared word about some installation.
And now, I no longer have some icons like front camera, rear camera, offroad pages...
Fromt camera and rear camera works well if i use the R.

Thank you for your info!
Sponsored

 

Hootbro

Well-Known Member
First Name
Don
Joined
Apr 13, 2019
Threads
57
Messages
10,184
Reaction score
19,950
Location
Delaware
Vehicle(s)
2025 Gladiator Sport
Radio has to do a deep sleep reboot. That mean engine off, exit vehicle and lock the doors and leave it for a few hours with overnight best results. May have to be done twice.

When you pulled the batteries off line, the radio lost it's configuration setting and went to a default state. Has to do the deep sleep reboot to reconfigure to the vehicle as built.
 

RickF

Well-Known Member
First Name
Rick
Joined
May 31, 2022
Threads
1
Messages
94
Reaction score
120
Location
San Antonio, Texas
Vehicle(s)
2020 Sting Gray JT Rubicon
I had to pull the radio/infotainment system fuse once to reset it, and it took a couple of days for it to return to normal operation. During that time, there were all kinds of weird things going on with the software--missing menus, bizarre spacing of the buttons on the interface, etc. But everything resolved itself eventually.
Sponsored

 
 







Top