RSI SmartCap Replica???

[immaechu]

Has anyone seen this or have one? They seem to have a few posts on eBay with different JT's with this cap.

But when I message them and ask about it they can't tell me anything about it. Its a little more than $1k+ less than the RSI Smartcap too! But looks almost identical.

https://www.ebay.com/itm/3555543775...08&osub=-1~1&crd=20240503211757&segname=11051

Sponsored

 

[RudeJeepin]

Has anyone seen this or have one? They seem to have a few posts on eBay with different JT's with this cap.

But when I message them and ask about it they can't tell me anything about it. Its a little more than $1k+ less than the RSI Smartcap too! But looks almost identical.

https://www.ebay.com/itm/3555543775...08&osub=-1~1&crd=20240503211757&segname=11051

No clue, but here's yet another one. Different seller and has side windows, but looks the same as the one you posted.
https://www.ebay.com/itm/1263620637...lp:2332490&itmmeta=01HX0Y3JPA66DPNVTMYHSZ3E6K

I'd like a copy for mine, just not ready to spend the coin yet.

 

[immaechu]

Here is another one too.

https://www.ebay.com/itm/2564180530...er&brand=Shell&_trksid=p4481478.c101506.m1851


I told them I was down the street from them and asked if they had one to show me. Either on their personal JT or just a display. All they could say was "all in boxes".

 

[Mr._Bill]

That looks like a Smartcap clone, probably made somewhere in Asia. After owning a RSI Smartcap, I would not want anything else. I also tend to avoid sellers on ebay with less than a 99.5% rating.

 

[Vtur]

RSI design isn't hard to copy. They are just pressed and welded seams, no stamping involved. Any small factory over there that has a press and a welder can copy one.

 

[nanook12]

No outside hinges on the Smartcap

 

[jeepers29]

No outside hinges on the Smartcap

That's because cheap chinese knock offs cut corners.

 

[RudeJeepin]

RSI design isn't hard to copy. They are just pressed and welded seams, no stamping involved. Any small factory over there that has a press and a welder can copy one.

Looks like they don't even need a welder.

 

[RudeJeepin]

No outside hinges on the Smartcap

While the hinges on the smarrtcap aren't on the outside, I'm pretty sure they are visible.

 

[SargeDiesel]

That looks like a Smartcap clone, probably made somewhere in Asia. After owning a RSI Smartcap, I would not want anything else. I also tend to avoid sellers on ebay with less than a 99.5% rating.

Agree about the ratings... and definitely not from an 83 or 97%.
The DD_Offroad link was a 100%... if interested, that would be the route to take imo.

Sponsored