Sponsored

Selec-Trac Transfer Case Swap - Myth Busted

OP
OP
DC3

DC3

Well-Known Member
First Name
Carl
Joined
Jul 14, 2020
Threads
42
Messages
319
Reaction score
850
Location
Willmar, MN
Website
dilabs.cc
Vehicle(s)
'21 JT GDE Ecodiesel, 22 Polestar 2
Occupation
engineer
Interesting. Any Idea if it would be easy to go the other way? normal tcase in a select trac?
Going the other way should be pretty easy. Swap the transfer case, controller, shift knob and update the BCM.

I'll confirm this once I'm finished with the swap.
Sponsored

 

l88m22vette

Member
Joined
Jul 20, 2023
Threads
1
Messages
15
Reaction score
19
Location
IL
Vehicle(s)
2021 Overland, 2022 Bronco
Bump, any updates @DC3? I'm a new Overlands owner and this might be my first upgrade since it was impossible to find the options I wanted with one.
 
OP
OP
DC3

DC3

Well-Known Member
First Name
Carl
Joined
Jul 14, 2020
Threads
42
Messages
319
Reaction score
850
Location
Willmar, MN
Website
dilabs.cc
Vehicle(s)
'21 JT GDE Ecodiesel, 22 Polestar 2
Occupation
engineer
I ultimately decided not to proceed with the swap, partly due to time constraints, and I eventually sold the Jeep. I thought of swapping my current Diesel but time is still an issue.

I am confident the mechanical swap is straightforward. The electrical is partially straightforward. Swap the transmission harness and build a jumper harness from the trans harness to the BCM in the cab. There will be some module tuning, not unlike what I did with the ACC retrofit.

If you decide to venture down this path, I would happily support you with the information I researched. I would budget $2,000 for the swap, assuming you do the work yourself.
Sponsored

 
 



Top