Suggestions on wheel brand and offset?

[Franc71]

Hey everyone, hope all is well...I've decided to go with the Mopar 2" lift along with a Teraflex 1.5" leveling kit, and a Synergy front adjustable track bar. Now for the Wheels. I'll be running 37's and would like a little of the tire showing past the fender....any suggestions on brand and offset?.....any feedback would be greatly appreciated...

Regards..

Sponsored

 

[AlaskaHoosier]

i went the same route and looking for the recommendations, as well.

 

[Benbean66]

I am running a 17x10 wheel w/ -18mm offset, and the tire tread sticks out about 2" past my Max Tow fenders.

 

[hjdca]

I am running the Method 703 with "Bead Grip" technology in zero offset, 17x8.5. This makes the 37" Goodyear MTRs stick out "one lug" past the fenders. No clearance or rubbing issues with my Clayton lift kit. They are light, and allow you to air down much more than normal wheels. They balanced up nicely, and so far, they have been great.

Bead Grip - humps and horizontal grooves

Black Method 703 in zero offset

 

[Jonesy22]

What bumper is that?

 

[j.o.y.ride]

Dont go by offset! Same offset on an 8.5" tire is going to be different than on a 10".

All that matters is backspacing. Width and offset together will be the inputs to arrive at backspacing.

 

[Planerdude]

Hey everyone, hope all is well...I've decided to go with the Mopar 2" lift along with a Teraflex 1.5" leveling kit, and a Synergy front adjustable track bar. Now for the Wheels. I'll be running 37's and would like a little of the tire showing past the fender....any suggestions on brand and offset?.....any feedback would be greatly appreciated...

Regards..

A + 24mm offset, using a 12.5” wide tire, is as tuck in the fender as you can get. I have Motiv Glock wheels with +18 mm offset and
37/13.5/18 tires, no lift.

Sponsored